OneStart

Menu

D-Link DWC-1000 manuals

DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. for more information
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. related documents
  7. document conventions
  8. Product Overview
  9. Features and Benefits
  10. Unpacking and Installation
  11. Unpacking
  12. Selecting a Location
  13. Front Panel Ports and LEDs
  14. Four Gigabit Ethernet LAN Ports
  15. Rear Panel
  16. Installing the Wireless Controller
  17. Connecting the Wireless Controller
  18. Sample Applications
  19. Authenticating to an Authentication Server
  20. Logging In to a Captive Portal
  21. Where to Go from Here
  22. Basic Configuration
  23. Logging In to the Web Management Interface
  24. Web Management Interface Layout
  25. Basic Configuration Procedures
  26. Basic Configuration Step #1. Enable DHCP Server (Optional)
  27. Basic Configuration Step #2. Select the Access Points to be Managed
  28. Basic Configuration Step #3. Change the SSID Name and Set Up Security
  29. Basic Configuration Step #4. Confirm Access Point Profile is Associated
  30. Basic Configuration Step #5. Configure Captive Portal Settings
  31. Add captive portal users
  32. Associate the captive portal group to an interface
  33. Customize the captive portal login
  34. Basic Configuration Step #6. Use SSID with RADIUS
  35. Advanced Configuration Settings
  36. QoS Configuration
  37. Defining DSCP and CoS Settings
  38. Configuring CoS Priorities
  39. VLANs
  40. Creating VLANs
  41. Editing VLANs
  42. Deleting VLANs
  43. Port VLANs
  44. MultiVLAN Subnets
  45. DMZ Settings
  46. Configuring DMZ Settings
  47. Adding a Static Route
  48. Editing Static Routes
  49. Deleting Static Routes
  50. Auto-Failover Settings
  51. Load Balancing Settings
  52. Additional Advanced Configuration Settings
  53. Securing Your Network
  54. Managing Clients
  55. Editing Clients
  56. Deleting Clients
  57. Content Filtering
  58. Specifying Approved URLs
  59. Specifying Blocked Keywords
  60. Exporting Web Filters
  61. Additional Security Settings
  62. VPN Settings
  63. Configuring VPN Clients
  64. Configuring IPsec Policies
  65. Example of a Manual Policy
  66. Editing IPsec Policies
  67. Enabling IPsec Policies
  68. Disabling IPsec Policies
  69. Exporting IPsec Policies
  70. Deleting IPsec Policies
  71. Mode Config Settings
  72. DHCP Range
  73. PPTP/LT2P Tunnels
  74. Configuring PPTP Servers
  75. L2TP Tunnel Support
  76. OpenVPN Support
  77. Additional VPN Settings
  78. Viewing Status and Statistics
  79. Viewing CPU and Memory Utilization
  80. Viewing System Status
  81. Viewing Managed Access Point Information
  82. Viewing Cluster Information
  83. Viewing Hardware and Usage Statistics
  84. Wired Port Statistics
  85. Managed Access Points and Associated Clients Statistics
  86. LAN-Associated Clients
  87. WLAN-Associated Clients
  88. Sessions through the Wireless Controller
  89. Associated Clients
  90. LAN Clients
  91. Detected Clients
  92. Access Point Status
  93. Access Point Summary
  94. Managed Access Point
  95. Authentication Failure Status
  96. AP RF Scan Status
  97. Global Status
  98. Peer Controller Status
  99. Peer Controller Configuration Status
  100. Peer Controller Managed AP Status
  101. IP Discovery
  102. Configuration Receive Status
  103. AP Hardware Capability
  104. Client Status
  105. Associated Client Status
  106. Associated Client SSID Status
  107. Associated Client VAP Status
  108. Controller Associated Client Status
  109. Detected Client Status
  110. Pre-Authorization History
  111. Detected Client Roam History
  112. Maintenance
  113. Group Management
  114. Editing User Groups
  115. Configuring Login Policies
  116. Configuring Browser Policies
  117. Configuring IP Policies
  118. User Management
  119. Importing Users
  120. Editing Users
  121. Deleting Users
  122. Backing Up Configuration Settings
  123. Restoring Configuration Settings
  124. Restoring Factory Default Settings
  125. Rebooting the Wireless Controller
  126. Upgrading Firmware
  127. Wireless Controller Firmware Upgrade
  128. Activating Licenses
  129. Using the Command Line Interface
  130. Troubleshooting
  131. LED Troubleshooting
  132. Troubleshooting the Web Management Interface
  133. Problems with Date and Time
  134. Network Performance and Rogue Access Point Detection
  135. Using Traceroute
  136. Performing DNS Lookups
  137. Capturing Log Packets
  138. Checking Log Settings
  139. Tracking Traffic
  140. Remote Logging
  141. Wireless Controller Event Log
  142. IPsec VPN Log Messages
  143. Appendix A. Basic Planning Worksheet
  144. Appendix B. Factory Default Settings
  145. Appendix C. Glossary
  146. Appendix D. Limited Lifetime Warranty
  147. Index
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. user manual
  2. copyright notice
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Chapter 1. Introduction
  9. About this User Manual
  10. Typographical Conventions
  11. Chapter 2. Configuring Your Network
  12. LAN DHCP Reserved IPs
  13. LAN DHCP Leased Clients
  14. LAN Configuration in an IP v6 Network
  15. DHCP v6 Leased Clients
  16. Configuring IP v6 Router Advertisements
  17. Port Queue Scheduling
  18. Port Queue Status
  19. Option QoS Configuration
  20. bandwidth management
  21. Traffic Selector Configuration
  22. LAN QoS Configuration
  23. DSCP Configuration
  24. Remark CoS to DSCP
  25. VLAN Configuration
  26. Associating VLANs to ports
  27. Multiple VLA N Subnets
  28. Configurable Port: DMZ Setup
  29. Universal Plug and Play (UP nP)
  30. Captive Portal
  31. captive portal configuration
  32. Captive Portal Session
  33. WLAN CP Interface Association
  34. WLAN global configuration
  35. Wireless Discovery configuration
  36. Wireless Discovery Status
  37. AP Profile Global Configuration
  38. radio configuration
  39. qos configuration
  40. Chapter 3. Configuring Wireless LAN
  41. System Overview
  42. Device Status
  43. Wireless LAN AP information
  44. Cluster information
  45. Resource Utilization
  46. Traffic Statistics
  47. Managed AP and Associated Clients Statistics
  48. LAN Assoicated Clients
  49. WLAN Assoicated Clients
  50. Active Connections
  51. LAN Client Info
  52. LAN Clients
  53. Detected Clients
  54. Access Point
  55. AP Summary
  56. Managed AP Status
  57. Authentication Failure Status
  58. AP RF Scan Status
  59. Global Info
  60. Peer Contorller Status
  61. Peer Controller Configuration Status
  62. Peer Controller Managed AP Status
  63. IP Discovery
  64. Configuration Receive Status
  65. AP Hardware Capability
  66. Wireless Client Status
  67. Assocaited Client Status
  68. Associated Client SSID Status
  69. Associated Client VAP Status
  70. Cont roller Associated Client Status
  71. Detected Client Status
  72. Pre-A uthoriz ation History
  73. Detected Client Roam History
  74. Valid Access Point Configuration
  75. RF Management
  76. Channel Plan History
  77. Manual Channel Plan
  78. Manual Power Adjustment Plan
  79. Access Point Software Download
  80. Local OUI Database Summary
  81. AP Provisioning Summary
  82. Manual Management
  83. Internet Connection Set up Wizard
  84. Option Configuration
  85. Option Port IP address
  86. Option DNS Servers
  87. PPPoE
  88. Russia L2TP and PP TP Option
  89. Option Configuration in an IP v6 Network
  90. Checking Option Status
  91. Features with Multipl e Option Links
  92. Load Balancing
  93. Protocol Bindings
  94. Routing Configuration
  95. Dynamic Routing (RIP)
  96. Static Routing
  97. OSPF
  98. to4 Tunneling
  99. IGMP Setup
  100. Option Port Settings
  101. IP Aliases
  102. Firewall Rules
  103. Defining Rule Schedules
  104. Configuring Firewall Rules
  105. Firewall Rule Configuration Examples
  106. Security on Custom Servic es
  107. ALG support
  108. VPN Passthrough for Firewall
  109. Client
  110. Application Rules
  111. Application Rules Status
  112. Cont ent Filtering
  113. Approved URLs
  114. Blocked Keywords
  115. Export Web Filter
  116. IP/MAC Binding
  117. RADIUS Settings
  118. Switch Settings
  119. Protecting from Internet Attacks
  120. Chapter 8. IPsec / PPTP / L2TP VPN
  121. VPN Wizard
  122. Configuring IPsec Policies
  123. Extended Aut hentication (XAUTH)
  124. Internet over IPS ec tunnel
  125. PPTP / L2TP Tunnels
  126. L2TP Tunnel Support
  127. OpenVPN Support
  128. Chapter 9. SSL VPN
  129. Groups and Users
  130. Users and Passwords
  131. Using SSL VPN Policies
  132. Using Network Res ourc es
  133. Application Port Forwarding
  134. SSL VPN Client Configuration
  135. Creating Portal Layouts
  136. Active VPN Tunnels
  137. Chapter 10. Advanced System Functionalities
  138. USB Share Port
  139. Authentication Certificates
  140. Chapter 11. Advanced Wireless Controller Features
  141. Distributed Tunneling
  142. Distributed Tunneling Status
  143. Peer Controller Configuration
  145. WIDS Configuration
  146. WIDS Client Configuration
  147. Chapter 12. Administration & Management
  148. SNMP Configuration
  149. SNMP Traps
  150. Configuring Time Zone and NTP
  151. Log Configuration
  152. Defining What to Log
  153. Sending Logs to E-mail or Syslog
  154. E vent Log Viewer in GUI
  155. Backing up and Restoring Configuration Settings
  156. Upgrading Wirelesss Controller Firmware
  157. Dynamic DNS Setup
  158. Using Diagnostic Tools
  159. Ping
  160. DNS Lookup
  161. Chapter 13. License Activation
  162. appendix a. glossary
  163. appendix b. factory default settings
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. user manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Chapter 1. Introduction
  8. About this User Manual
  9. Chapter 2. Configuring Your Network
  10. Figure 1: Setup page for LAN TCP/IP settings (DHCP server)
  11. Figure 2: Setup page for LAN TCP/IP settings (DHCP Relay)
  12. LAN DHCP Reserved IPs
  13. LAN DHCP Leased Clients
  14. LAN DHCP Pools
  15. LAN Configuration in an IPv6 Network
  16. Figure 7: IPv6 LAN and DHCPv6 configuration
  17. DHCPv6 Leased Clients
  18. Configuring IPv6 Router Advertisements
  19. Figure 9: Configuring the Router Advertisement Daemon
  20. Figure 10: IPv6 Advertisement Prefix settings
  21. LAN QoS Configuration
  22. DSCP Configuration
  23. Port Queue Scheduling
  24. Port Queue Status
  25. Option QoS Configuration
  26. Figure 16: Option QoS Configuration
  27. Traffic Selector Configuration
  28. Figure 18: Traffic Selector Configuration
  29. Remark CoS to DSCP
  30. VLAN Configuration Options
  31. Figure 21: VLAN Configuration Options
  32. Associating VLANs to ports
  33. Figure 22: Port VLAN list
  34. Multiple VLAN Subnets
  35. Configurable Port: DMZ Setup
  36. Universal Plug and Play (UPnP)
  37. Figure 26: UPnP Configuration
  38. Captive Portal
  39. Figure 27: Captive Portal Setup
  40. Figure 28: Adding or Editing a Custom Captive Portal
  41. Captive Portal SSID Setup
  42. Captive Portal Session
  43. Service Level Agreement (SLA)
  44. Billing Profiles
  45. Figure 33: List of Configured Billing Profiles
  46. Figure 34: Billing Profiles Configuration Settings
  47. Block MAC
  48. Captive Portal Front Desk
  49. Figure 36: Login prompt for Front Desk users
  50. WLAN global configuration
  51. Figure 37: WLAN global configuration
  52. Wireless Discovery configuration
  53. Figure 38: Configuring the Wireless Discovery
  54. Wireless Discovery Status
  55. AP Profile Global Configuration
  56. Figure 40: AP Profile Global Configuration
  57. Figure 41: AP Profile List
  58. Figure 42: AP Profile - Radio configuration (Part-1)
  59. Figure 43: AP Profile - Radio configuration (Part-2)
  60. Figure 44: AP Profile - SSID configuration
  61. Figure 45: AP Profile - QoS configuration (Part-1)
  62. Figure 46: AP Profile - QoS configuration (Part-2)
  63. Chapter 3. Configuring Wireless LAN
  64. WLAN Visualization support
  65. Visualization Launch
  66. Figure 49: The launched visualization page
  67. System Overview
  68. Device Status
  69. Figure 51: Device Status display
  70. Wireless LAN AP information
  71. Figure 53: Wireless LAN AP information
  72. Cluster information
  73. Figure 54: Cluster information
  74. Resource Utilization
  75. Figure 55: Resource Utilization statistics
  76. Traffic Statistics
  77. Wired Port Statistics
  78. Associated Client Status/Statistics
  79. LAN Associated Clients
  80. WLAN Associated Clients
  81. Active Connections
  82. LAN Client Info
  83. Figure 62: Associated Clients
  84. LAN Clients
  85. Detected Clients
  86. Figure 64: Detected Clients
  87. Active VPN Tunnels
  88. Figure 65: List of current Active VPN Sessions
  89. Access Point
  90. AP Summary
  91. Managed AP Status
  92. Authentication Failure Status
  93. Figure 69: Authentication Failure Status
  94. AP RF Scan Status
  95. Global Info
  96. Figure 71: Global Status (Part 1)
  97. Figure 72: Global Status (Part 2)
  98. Peer Controller Status
  99. Peer Controller Configuration Status
  100. Peer Controller Managed AP Status
  101. IP Discovery
  102. Configuration Receive Status
  103. AP Hardware Capability
  104. Figure 78: AP Hardware Capability
  105. Wireless Client Status
  106. Associated Client Status
  107. Associated Client SSID Status
  108. Associated Client VAP Status
  109. Controller Associated Client Status
  110. Detected Client Status
  111. Figure 84: Detected Client Status
  112. Pre-Authorization History
  113. Detected Client Roam History
  114. Figure 86: Detected Client Roam History
  115. Chapter 5. AP Management
  116. Figure 87: Valid Access Point Configuration
  117. Figure 88: Add a Valid Access Point
  118. RF Management
  119. Figure 89: RF configuration
  120. Channel Plan History
  121. Manual Channel Plan
  122. Figure 91: Manual Channel Plan
  123. Manual Power Adjustment Plan
  124. Access Point Software Download
  125. Local OUI Database Summary
  126. AP Provisioning Summary
  127. Manual Management
  128. Figure 96: Manual Management
  129. Chapter 6. Connecting to the Internet: Option Setup
  130. Option Configuration
  131. Option Port IP address
  132. Option DNS Servers
  133. PPPoE
  134. Figure 99: PPPoE configuration for standard ISPs
  135. Figure 100: Option1 configuration for Japanese Multiple PPPoE (part 1)
  136. Russia L2TP and PPTP Option
  137. Option Configuration in an IPv6 Network
  138. Figure 103: IPv6 Option1 Setup page
  139. Checking Option Status
  140. Figure 104: Connection Status information of Option1
  141. Features with Multiple Option Links
  142. Load Balancing
  143. Protocol Bindings
  144. Figure 106: Protocol binding setup to associate a service and/or LAN source to an Option and/or destination network
  145. Routing Configuration
  146. Figure 107: Routing Mode is used to configure traffic routing between Option and LAN, as well as Dynamic routing (RIP)
  147. Dynamic Routing (RIP)
  148. Static Routing
  149. OSPF
  150. Figure 111: OSPFv2 Configuration
  151. to4 Tunneling
  152. IPv6 Tunnels Status
  153. ISATAP Tunnels
  154. IGMP Setup
  155. Figure 115: IGMP Setup
  156. Option Port Settings
  157. Figure 116: Physical Option port settings
  158. IP Aliases
  159. Firewall Rules
  160. Defining Rule Schedules
  161. Configuring Firewall Rules
  163. Firewall Rule Configuration Examples
  164. Figure 122: Schedule configuration for the above example
  165. Security on Custom Services
  166. ALG support
  167. VPN Passthrough for Firewall
  168. Client
  169. Application Rules
  170. Figure 127: List of Available Application Rules showing 4 unique rules
  171. Application Rules Status
  172. Content Filtering
  173. Approved URLs
  174. Blocked Keywords
  175. Export Web Filter
  176. Content Keeper Support (Web Content Filtering)
  177. IP/MAC Binding
  178. Switch Settings
  179. Figure 135: Switch settings
  180. Protecting from Internet Attacks
  181. Figure 136: Protecting the controller and LAN from internet attacks
  182. Chapter 8. IPsec / PPTP / L2TP VPN
  183. connected to the Internet
  184. Figure 138: Example of three IPsec client connections to the internal network through the DWC IPsec gateway
  185. VPN Wizard
  186. Configuring IPsec Policies
  187. Figure 140: IPsec policy configuration
  188. Figure 141: IPsec policy configuration continued (Auto policy via IKE)
  189. Extended Authentication (XAUTH)
  190. Internet over IPSec tunnel
  191. PPTP Tunnel Support
  192. Figure 144: PPTP VPN connection status
  193. L2TP Tunnel Support
  194. OpenVPN Support
  195. Figure 147: OpenVPN configuration
  196. Chapter 9. SSL VPN
  197. Figure 148: Example of clientless SSL VPN connections to the DWC-1000
  198. Groups and Users
  199. Figure 150: User Group Configuration
  200. Figure 151: SSLVPN Settings
  201. Figure 152: Group login policies options
  202. Figure 153: Browser policies options
  203. Figure 154: IP policies options
  204. Users and Passwords
  205. User Database
  206. Figure 157: User Database export
  207. Using SSL VPN Policies
  208. Figure 158: List of SSL VPN polices (Global filter)
  209. Figure 159: SSL VPN policy configuration
  210. Using Network Resources
  211. Application Port Forwarding
  212. SSL VPN Client Configuration
  213. Figure 162: SSL VPN client adapter and access configuration
  214. Creating Portal Layouts
  215. Figure 164: SSL VPN Portal configuration
  216. Chapter 10. Advanced System Functionalities
  217. USB Share Port
  218. Authentication Certificates
  219. Figure 167: Certificate summary for IPsec and HTTPS management
  220. Chapter 11. Advanced Wireless Controller Features
  221. SNMP Trap
  222. Figure 170: SNMP Trap settings
  223. Distributed Tunneling
  224. Distributed Tunneling Status
  225. Peer Controller Configuration
  226. Figure 173: Peer Controller Configuration Request Status
  228. WIDS Configuration
  229. WIDS Client Configuration
  230. WDS Settings
  231. Group Configuration
  232. Link Configuration
  233. Figure 179: WDS AP Link Configuration
  234. External Authentications
  235. RADIUS Settings
  236. NT Domain Settings
  237. LDAP Settings
  238. Figure 182: LDAP Authentication Configuration
  239. Active Directory Settings
  240. Figure 183: Active Directory Configuration
  241. POP3 Settings
  242. Figure 184: POP3 Server Configuration
  243. Figure 185: POP3 CA File List
  244. Remote Management
  245. SNMP Configuration
  246. Figure 187: SNMP Users, Traps, and Access Control
  247. SNMP Traps
  248. Figure 189: SNMP Traps
  249. Configuring Time Zone and NTP
  250. Log Configuration
  251. Defining What to Log
  252. Figure 191: Facility settings for Logging
  253. Sending Logs to E-mail or Syslog
  254. Figure 193: E-mail configuration as a Remote Logging option
  255. Event Log Viewer in GUI
  256. Figure 195: VPN logs displayed in GUI event viewer
  257. Backing up and Restoring Configuration Settings
  258. Upgrading Wirelesss Controller Firmware
  259. Figure 198: Firmware version information and upgrade option
  260. Dynamic DNS Setup
  261. Using Diagnostic Tools
  262. Ping
  263. DNS Lookup
  264. Chapter 13. License Activation
  265. Figure 201: Installing a License
  266. Appendix A. Glossary
  267. Appendix B. Factory Default Settings
  268. Appendix D. Product Statement
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Network Router
Table of contents
  1. quick installation guide
  2. about this guide
  3. installation and connection
  4. initial configuration
  5. configuration initiale
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Network Router
Table of contents
  1. quick installation guide
  2. about this guide
  3. installation and connection
  4. initial configuration
  5. additional information
  6. configuration initiale
  7. fcc warning
  8. safety instructions
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Network Router
Table of contents
  1. Preface
  2. Safety Instructions
  3. Protecting Against Electrostatic Discharge
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Product Overview
  13. Features and Benefits
  14. Package Contents
  15. Front Panel
  16. Installation
  17. Rack Mount
  18. Connecting the Wireless Controller
  19. Basic Configuration
  20. Log in to the Web Management Interface
  21. Web Management Interface Layout
  22. Standard Web Management Interface Features
  23. Basic Configuration Procedures
  24. Step #1: Enable DHCP Server (Optional)
  25. Step #2: Configure Country Code
  26. Step #3: Select APs to be Managed
  27. Step #4: Change the SSID and Set Up Security
  28. Step #5: Select MAC Authentication Mode
  29. Step #6: Confirm Access Point Profile is Associated
  30. Step #7: Configure Captive Portal Settings
  31. Step #8: Use SSID with RADIUS Sever as Authenticator
  32. Step #9: Configure Guest Management
  33. Step #10: Configure a BYOD Environment
  34. Where to Go from Here
  35. Advanced WLAN Configuration
  36. WLAN General Settings
  37. Channel Plan and Power Settings
  38. Configure Power Settings
  39. WIDS
  40. Configure Client WIDS Settings
  41. Distributed Tunnel
  42. WLAN Visualization
  43. Launch
  44. AP Discovery Methods
  45. Configure L2/ VLAN Discovery
  46. L3/ IP Discovery
  47. Managed APs
  48. Add a AP from Discovered AP List
  49. Manual Change Channel and Power of Managed AP
  50. Configure AP Debug Mode
  51. Configure AP Provisioning
  52. AP Profiles
  53. Configure AP Profile Radio
  54. Configure AP Profile SSID
  55. Configure AP Profile QoS
  56. SSID Profiles
  57. Wireless Distribution System (WDS)
  58. Configure WDS Managed AP
  60. Configure WDS AP Link
  61. Peer Group
  62. Synchronize Peer Group
  63. AP Firmware Download
  64. AP Firmware Status
  65. Advanced Network Configuration
  66. IP Mode
  67. LAN Configuration
  68. IPv6 LAN Settings
  69. IPv6 Address Pools
  70. IPv6 Router Advertisement
  71. IPv6 Advertisement Prefixes
  72. LAN DHCP Reserved IPs
  73. IP/MAC Binding
  74. IGMP Setup
  75. UPnP Setup
  76. Configure Jumbo Frames
  77. Internet
  78. Option 2/DMZ Settings
  79. IPv6 Option 1/2 Settings
  80. Option Mode
  81. Auto-Rollover using Option Port
  82. Load Balancing
  83. Round Robin
  84. Spillover
  85. Routing
  86. Transparent
  87. IP Aliasing
  88. DMZ DHCP Reserved IPs
  89. Dynamic DNS
  90. VLANs
  91. Editing VLANs
  92. MultiVLAN Subnets
  93. Port VLANs
  94. MAC Based VLANs
  95. Voice VLANs
  96. Protocol Based VLANs
  97. Double VLANs
  98. GVRP
  100. Configure IPv6 Static Routing
  101. Editing/Deleting Static Routes
  102. OSPF
  103. OSPFv3 (IPv6)
  104. to 4 Tunneling (IPv6)
  105. ISATAP Tunnels (IPv6)
  106. Protocol Binding
  107. QoS Configuration
  108. Enabling QoS Mode
  109. Defining DSCP and CoS on each port
  110. Configuring 802.1p Priority
  111. Configuring DSCP Priority
  112. QoS Policy
  113. Configure Flow-based Control
  114. Configure Auto VoIP QoS
  115. Configure Queue Scheduler
  116. Queue Management
  117. Setup CoS and DSCP Marking
  118. Option QoS/Traffic Shaping
  119. Securing Your Network
  120. Client Management
  121. Editing/Deleting Clients
  122. Group Management
  123. Editing User Groups
  124. Deleting User Groups
  125. Configuring Login Policies
  126. Configuring Browser Policies
  127. Configuring IP Policies
  128. User Management
  129. Importing Users
  130. Editing Users
  131. Deleting Users
  132. Guest Account Usage Management
  133. Payment Gateway
  134. Login Profiles
  135. Customize the SLA of the Captive Portal
  136. Upload a Custom Profile
  137. External Authentication
  138. Configure RADIUS Accounting
  139. Configure RADIUS Accounting Global Setting
  140. Configure POP3 Server
  141. Configure POP3 Trusted CA
  142. Configure LDAP Server
  143. Configure Active Directory Server
  144. Configure NT Domain Server
  145. Facebook Wi-Fi
  146. Web Content Filter
  147. Approved URLs
  148. Blocked Keywords
  149. Firewall
  150. Schedules
  151. Blocked Clients
  152. Custom Services
  153. ALGs
  154. SMTP ALGs
  155. Mail Filtering
  156. VPN Passthrough
  157. Dynamic Port Forwarding
  158. Attack Checks
  159. IPSec VPN
  160. Tunnel Mode
  161. Split DNS Names
  162. DHCP Range
  163. Certificates
  164. Active Self Certificates
  165. Self Certificate Requests
  166. Easy VPN Setup
  167. PPTP VPN
  168. Client
  169. PPTP Active Users List
  170. L2TP VPN
  171. L2TP Active Users List
  172. SSL VPN
  173. Portal Layouts
  174. Resources
  175. Port Forwarding
  177. Client Routes
  178. Open VPN
  180. Access Server Client
  181. Local Networks
  182. Remote Networks
  183. Authentication
  184. Status and Statistics
  185. Viewing Statistic and Utilization
  186. Manage Dashboard
  187. Viewing System Status
  188. Viewing USB Status
  189. Viewing DHCP Clients
  190. Viewing Captive Portal Sessions
  191. Viewing Active Sessions
  192. Viewing VPN Sessions
  193. Viewing Traffic on Interfaces
  194. Viewing Controller Status and Statistics
  195. Controller Associated Clients
  197. Peer Controller Receive Status
  198. Peer Controller Sent Status
  199. Viewing Access Point Information
  200. All AP
  201. Managed
  202. Peer Managed
  203. Authentication Failed
  204. RF Scan
  205. De-Authentication Attacks
  206. Hardware Capability
  207. Associated Clients Global Status
  208. Associated Clients
  209. Ad Hoc Clients
  210. Detected Clients
  211. Viewing Cluster Information
  212. Viewing WDS Group Status
  213. WDS Group AP Status
  214. Viewing WDS AP Status
  215. Viewing WDS Link Status
  216. Viewing WDS Link Statistics
  217. Maintenance
  218. System Settings
  219. Set Login Session Timeout
  220. Activating Licenses
  221. Remote Management
  222. Power Saving Settings
  223. Using SNMP
  224. Configure SNMP Trap List
  225. Configure SNMP Access Control List
  226. Configure SNMP System Info
  227. Backup Configuration Settings
  228. Restoring Configuration Settings
  229. Restoring Factory Default Settings
  230. Rebooting the Wireless Controller
  231. Upgrading Firmware
  232. Using the Command Line Interface
  233. Troubleshooting
  234. LED Troubleshooting
  235. Using the Reset Button to Restore Default Settings
  236. Connection Problems
  237. Using Diagnostic Tools on the Wireless Controller
  238. Using Traceroute
  239. Performing DNS Lookups
  240. Capturing Log Packets
  241. Conducting a System Check
  242. Log Settings
  243. Tracking Traffic/Routing Logs
  244. System Logging
  245. Remote Logging
  246. Syslog Server Configuration
  247. Event Log
  248. Current Logs
  249. WLAN Logs
  250. Firewall Logs
  251. IPSec VPN Logs
  252. SSL VPN Logs
  253. WCF Logs
  254. Captive Portal Logs
  255. Appendix A - Basic Planning Worksheet
  256. Appendix B - Factory Default Settings
  257. Appendix C - Glossary
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Chapter 1. Introduction
  9. Typographical Conventions
  10. Chapter 2. Configuring Your Network
  11. Figure 1: Setup page for LAN TCP/IP settings
  12. LAN Configuration in an IPv6 Network
  13. Figure 2: IPv6 LAN and DHCPv6 configuration
  14. Configuring IPv6 Router Advertisements
  15. Figure 3: Configuring the Router Advertisement Daemon
  16. VLAN Configuration
  17. Associating VLANs to ports
  18. Figure 6: Port VLAN list
  19. Configurable Port: DMZ Setup
  20. Universal Plug and Play (UPnP)
  21. Figure 9: UPnP Configuration
  22. Captive Portal
  23. Figure 11: WLAN global configuration
  24. Wireless Discovery configuration
  25. Figure 12: Configuring the Wireless Discovery
  26. Figure 13: Wireless Discovery status
  27. AP Profile Global Configuration
  28. Figure 15: AP Profile List
  29. Chapter 3. Connecting to the Internet: WAN Setup
  30. WAN Configuration
  31. WAN Port IP address
  32. PPPoE
  33. Figure 18: PPPoE configuration for standard ISPs
  34. Figure 19: Option1 configuration for Japanese Multiple PPPoE (part 1)
  35. Russia L2TP and PPTP WAN
  36. WAN Configuration in an IPv6 Network
  37. Figure 22: IPv6 WAN Setup
  38. Checking WAN Status
  39. Features with Multiple WAN Links
  40. Auto Failover
  41. Protocol Bindings
  42. Routing Configuration
  43. Figure 26: Routing Mode is used to configure traffic routing between WAN and LAN, as well as Dynamic routing (RIP)
  44. Dynamic Routing (RIP)
  45. Static Routing
  46. WAN Port Settings
  47. Figure 28: Physical WAN port settings
  48. System Overview
  49. Figure 29: Device Status display
  50. Resource Utilization
  51. Figure 31: Resource Utilization statistics
  52. Traffic Statistics
  53. Active Connections
  54. Figure 34: List of current Active Firewall Sessions
  55. LAN Clients
  56. Access Point status
  57. Figure 37: AP status
  58. Figure 38: Managed AP status
  59. Global Status
  60. Figure 40: Peer Controller Status
  61. Figure 41: Peer Controller Configuration Status
  62. Figure 42: Peer Controller Managed AP Status
  63. Figure 43: Configuration Receive Status
  64. Wireless Client Status
  65. Figure 45: Associated Client SSID Status
  66. Figure 46: Associated Client VAP Status
  67. Figure 47: Controller Associated Client Status
  68. Figure 48: Detected Client Status
  69. Figure 49: Pre-Auth History
  70. Figure 50: Detected Client Roam History
  71. AP Management
  72. Figure 52: Add a Valid Access Point
  73. Figure 53: RF configuration
  74. Figure 54: Channel Plan History
  75. Figure 55: Manual Channel Plan
  76. Figure 56: Manual Power Adjustment Plan
  77. Figure 57: Access Point Software Download
  78. Figure 58: Local OUI Database
  79. Associated Client Status/Statistics
  80. Figure 60: WLAN Associated Clients
  81. Firewall Rules
  82. Defining Rule Schedules
  83. Configuring Firewall Rules
  84. Figure 63: Example where an outbound SNAT rule is used to map an external IP address 209.156.200.225) to a private DMZ IP address (10.30.30.30)
  85. Firewall Rule Configuration Examples
  86. Figure 65: Schedule configuration for the above example
  87. Security on Custom Services
  88. VPN Passthrough for Firewall
  89. Application Rules
  90. Web Content Filtering
  91. Approved URLs
  92. Blocked Keywords
  93. Export Web Filter
  94. IP/MAC Binding
  95. Protecting from Internet Attacks
  96. Figure 75: Protecting the controller and LAN from internet attacks
  97. Chapter 6. IPsec / PPTP / L2TP VPN
  98. Figure 77: Example of three IPsec client connections to the internal network through the DWC IPsec gateway
  99. VPN Wizard
  100. Configuring IPsec Policies
  101. Figure 79: IPsec policy configuration
  102. Figure 80: IPsec policy configuration continued (Auto policy via IKE)
  103. Extended Authentication (XAUTH)
  104. Configuring VPN clients
  105. Figure 82: PPTP tunnel configuration – PPTP Client
  106. L2TP Tunnel Support
  107. OpenVPN Support
  108. Figure 86: OpenVPN configuration
  109. Chapter 7. SSL VPN
  110. Figure 87: Example of clientless SSL VPN connections to the DWC-1000
  111. Groups and Users
  112. Figure 89: User group configuration
  113. Figure 90: SSLVPN Settings
  114. Figure 91: Group login policies options
  115. Figure 92: Browser policies options
  116. Figure 93: IP policies options
  117. Users and Passwords
  118. Using SSL VPN Policies
  119. Figure 96: List of SSL VPN polices (Global filter)
  120. Figure 97: SSL VPN policy configuration
  121. Using Network Resources
  122. Application Port Forwarding
  123. SSL VPN Client Configuration
  124. Figure 100: SSL VPN client adapter and access configuration
  125. Creating Portal Layouts
  126. Figure 102: SSL VPN Portal configuration
  127. Chapter 8. Advanced Configuration Tools
  128. Authentication Certificates
  129. WIDS Security
  130. WIDS Client Configuration
  131. Figure 106: WIDS Client Configuration
  132. Chapter 9. Administration & Management
  133. SNMP Configuration
  134. Configuring Time Zone and NTP
  135. Log Configuration
  136. Defining What to Log
  137. Figure 111: Facility settings for Logging
  138. Sending Logs to E-mail or Syslog
  139. Figure 113: E-mail configuration as a Remote Logging option
  140. Event Log Viewer in GUI
  141. Backing up and Restoring Configuration Settings
  142. Upgrading wirelesss controller Firmware
  143. Dynamic DNS Setup
  144. Using Diagnostic Tools
  145. Ping
  146. Router Options
  147. Appendix A. Glossary
  148. Appendix B. Factory Default Settings
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. Preface
  2. Safety Cautions
  3. Protecting Against Electrostatic Discharge
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Product Overview
  14. Features and Benefits
  15. Package Contents
  16. Front Panel
  17. Installation
  18. Rack Mount
  19. Connecting the Wireless Controller
  20. Basic Configuration
  21. Log in to the Web Management Interface
  22. Web Management Interface Layout
  23. Standard Web Management Interface Features
  24. Basic Configuration Procedures
  25. Step #1: Enable DHCP Server (Optional)
  26. Step #2: Configure Country Code
  27. Step #3: Select APs to be Managed
  28. Step #4: Change the SSID and Set Up Security
  29. Step #5: Select MAC Authentication Mode
  30. Step #6: Confirm Access Point Profile is Associated
  31. Step #7: Configure Captive Portal Settings
  32. Step #8: Use SSID with RADIUS Sever as Authenticator
  33. Step #9: Configure Guest Management
  34. Where to Go from Here
  35. Advanced WLAN Configuration
  36. WLAN General Settings
  37. Channel Plan and Power Settings
  38. Configure Power Settings
  39. WIDS
  40. Configure Client WIDS Settings
  41. IP ACL Rules
  42. IP ACL Configuration Example
  43. MAC ACL Rules
  44. MAC ACL Configuration Example
  45. DiffServ
  46. DiffServ Policy
  47. DiffServ Policy Class Definition
  48. Distributed Tunnel
  49. WLAN Visualization
  50. Launch
  51. AP Discovery Methods
  52. Configure L2/ VLAN Discovery
  53. L3/ IP Discovery
  54. Managed APs
  55. Add a AP from Discovered AP List
  56. Manual Change Channel and Power of Managed AP
  57. Configure AP Debug Mode
  58. Configure AP Provisioning
  59. AP Profiles
  60. Configure AP Profile Radio
  61. Configure AP Profile SSID
  62. Configure AP Profile QoS
  63. SSID Profiles
  64. Wireless Distribution System (WDS)
  65. Configure WDS Managed AP Group
  66. Configure WDS Managed AP
  67. Configure WDS AP Link
  68. Peer Group
  69. Synchronize Peer Group
  70. AP Firmware Download
  71. AP Firmware Status
  72. Advanced Network Configuration
  73. LAN Configuration
  74. DHCP Address Pool
  75. IPv6 LAN Settings
  76. IPv6 Address Pools
  77. IPv6 Router Advertisement
  78. IPv6 Advertisement Prefixes
  79. LAN DHCP Reserved IPs
  80. IP/MAC Binding
  81. IGMP Setup
  82. UPnP Setup
  83. Configure Jumbo Frames
  84. Internet (IPv4)
  85. Option 2/DMZ Settings
  86. IPv6 Option 1/2 Settings
  87. Option Mode
  88. Auto-Rollover using Option Port
  89. Load Balancing
  90. Round Robin
  91. Spillover
  92. Routing
  93. Transparent
  94. IP Aliasing
  95. DMZ DHCP Reserved IPs
  96. Dynamic DNS
  97. VLANs
  98. Editing VLANs
  99. MultiVLAN Subnets
  100. Port VLANs
  102. Configure IPv6 Static Routing
  103. Editing/Deleting Static Routes
  104. OSPF
  105. OSPFv3 (IPv6)
  106. to 4 Tunneling (IPv6)
  107. ISATAP Tunnels (IPv6)
  108. Protocol Binding
  109. Securing Your Network
  110. Client Management
  111. Editing/Deleting Clients
  112. Group Management
  113. Editing User Groups
  114. Deleting User Groups
  115. Configuring Login Policies
  116. Configuring Browser Policies
  117. Configuring IP Policies
  118. User Management
  119. Importing Users
  120. Editing Users
  121. Deleting Users
  122. Hotspot
  123. Captive Portal Front Desk
  124. Guest Account Usage Management
  125. Payment Gateway
  126. Login Profiles
  127. Customize the SLA of the Captive Portal
  128. Upload a Custom Profile
  129. RADIUS Accounting Global Setting
  130. External Authentication
  131. Configure RADIUS Accounting
  132. Configure POP3 Server
  133. Configure POP3 Trusted CA
  134. Configure LDAP Server
  135. Configure Active Directory Server
  136. Configure NT Domain Server
  137. Facebook Wi-Fi
  138. Email Configuration
  139. Web Content Filter
  140. Approved URLs
  141. Blocked Keywords
  142. Dynamic Filtering
  143. Firewall
  144. Schedules
  145. Blocked Clients
  146. Custom Services
  147. ALGs
  148. SMTP ALGs
  149. Mail Filtering
  150. VPN Passthrough
  151. Dynamic Port Forwarding
  152. Attack Checks
  153. IPSec VPN
  154. Tunnel Mode
  155. Split DNS Names
  156. DHCP Range
  157. Certificates
  158. Active Self Certificates
  159. Self Certificate Requests
  160. Easy VPN Setup
  161. PPTP VPN
  162. Client
  163. PPTP Active Users List
  164. L2TP VPN
  165. L2TP Active Users List
  166. Server Policies
  167. Portal Layouts
  168. Resources
  169. Port Forwarding
  171. Client Routes
  172. Open VPN
  174. Access Server Client
  175. Local Networks
  176. Remote Networks
  177. Authentication
  178. Status and Statistics
  179. Viewing Statistic and Utilization
  180. Manage Dashboard
  181. System Information
  182. Viewing USB Status
  183. Network Information
  184. Viewing Captive Portal Sessions
  185. Viewing Active Sessions
  186. Viewing VPN Sessions
  187. Viewing Traffic on Interfaces
  188. IPv6 Tunnels Status
  189. Wireless Information
  190. Controller Associated Clients
  192. Peer Controller Receive Status
  193. Peer Controller Sent Status
  194. Viewing Access Point Information
  195. Managed
  196. Peer Managed
  197. Authentication Failed
  198. De-Authentication Attacks
  199. Hardware Capability
  200. Associated Clients
  202. Ad Hoc Clients
  203. Detected Clients
  204. Viewing Radius Accounting Server Statistics
  205. Viewing Cluster Information
  206. Viewing WDS Group Status
  207. WDS Group AP Status
  208. Viewing WDS AP Status
  209. Viewing WDS Link Status
  210. Viewing WDS Link Statistics
  211. ACL & DiffServ Status
  213. DiffServ Class
  214. DiffServ Policy Attribute
  215. Maintenance
  216. Administration
  217. Session Settings
  218. Package Manager
  219. Activating Licenses
  220. Localization
  221. Management
  222. Power Saving Settings
  223. SNMP
  224. Configure SNMP Trap List
  225. Configure SNMP Access Control List
  226. Configure SNMP System Info
  227. Firmware
  228. Restoring Configuration Settings
  229. Soft Reboot
  230. Rebooting the Wireless Controller
  231. Upgrading Firmware
  232. Using the Command Line Interface
  233. Wizard
  234. Internet Connection Wizard
  235. VPN Wizard
  236. Troubleshooting
  237. LED Troubleshooting
  238. Unable to Save Configuration Changes
  239. Using the Reset Button to Restore Default Settings
  240. Connection Problems
  241. Using Diagnostic Tools on the Wireless Controller
  242. Using Traceroute
  243. Performing DNS Lookups
  244. Capturing Log Packets
  245. Conducting a System Check
  246. Log Settings
  247. Tracking Traffic/Routing Logs
  248. System Logging
  249. Remote Logging
  250. Syslog Server Configuration
  251. All Logs
  252. Appendix A - Basic Planning Worksheet
  253. Appendix B - Factory Default Settings
  254. Appendix C - Glossary
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Chapter 1. Introduction
  9. Chapter 2. Accessing the CLI
  10. Chapter 3. Basic commands available on the CLI
  11. ESCAPE SEQUENCES
  12. Chapter 4. Command Hierarchy in CLI
  13. WLAN Management
  14. System
  15. Security
  16. RADIUS
  17. Chapter 7. Configuration commands
  18. UTIL configuration commands
  19. NE T configuration commands
  20. VPN configuration commands
  21. Security configuration commands
  22. History configuration commands
  23. wlan ap_management manual configure <macaddr
  24. wlan ap_management ap_database add <macaddr
  25. wlan ap_management ap_database delete <macaddr
  26. wlan ap_management poll_list configure
  27. wlan ap_management oui_database edit <ouival
  28. wlan ap_profile delete <profileid
  29. wlan ap_profile QoS configure <profileid> <radio
  30. wlan client add <macaddr
  31. wlan client delete <macaddr
  32. wlan peer_controller configure
  33. wlan peer_controller push_configuration <ipaddr
  34. wlan wlan_global_setting ap_validation configure
  35. wlan wlan_global_setting country configure
  36. system logging ipv4 configure
  38. system logging ipv6 configure
  39. system remote_management telnet configure
  40. system snmp trap delete <ltagent_ip
  41. system snmp access edit <ltrowid
  42. system switch_settings jumbo_frame configure
  43. system usb usb1 configure
  44. system group add
  45. system users edit <ltrow_id
  46. system group groupaccesscontrol configure <ltgroup_id
  47. system group access_control_ip add
  48. util system_check ping <ltip_address
  49. util md5sum <ltfileName
  50. qos lan status
  51. qos lan trustmode dscp enable <ltlanPort
  52. qos lan cos-to-dscp-remarking configure <ltcosValue> <ltdscpValue
  53. qos option traffic-selector add ip <ltipAddress> <ltservice> <ltbwProfile
  54. qos option traffic-selector del <lttrafficSelectorId
  55. net ipv6_tunnel six_to_four configure
  56. net lan dhcp reserved_ip configure <ltmac_address
  57. net dmz dhcp reserved_ip configure <ltmac_address
  58. net ethernet configure <ltinterface_name
  59. net lan ipv6 configure
  60. net lan ipv6 pool delete <ltipv6PoolStartAddr
  61. net ip_Aliasing server add
  62. net mode configure
  63. net ipv6_tunnel isatap delete <ltrow_id
  64. net Option Option2 ipv4 configure
  65. net Option mode configure
  66. net Option port_setup configure
  67. net Option configurable_port configure
  68. net Optionn Option2 ipv6 configure
  69. net routing ospfv2 configure <ltinterface
  70. net routing ospfv3 configure <ltinterface
  71. net Option pppoe configure
  72. net routing protocol_binding edit <ltrow_id
  73. net routing protocol_binding disable <ltrow_id
  74. net routing protocol_binding delete <ltrow_id
  75. net radvd pool add
  76. net routing dynamic configure
  77. net routing static ipv4 configure <ltname
  78. net routing static ipv4 delete <ltname
  79. net tahi del-route <ltip_address> <ltgw
  80. net tahi ping6 <ltip> <ltsize
  81. vpn l2tp server configure
  82. vpn pptp client_action <ltaction
  83. vpn sslvpn portal -layouts edit <ltrow_id
  84. vpn sslvpn portal -layouts set-default <ltrow_id
  85. vpn sslvpn resource add
  86. vpn sslvpn policy add
  87. vpn sslvpn policy delete <ltrow_id
  88. vpn sslvpn route delete <ltrow_id
  89. vpn sslvpn users domains delet e <ltrow_id
  90. vpn sslvpn users groups edit <ltrow_id
  91. vpn sslvpn users users edit <ltrow_id
  92. vpn sslvpn users users ip_policies configure <ltrow_id
  93. vpn ipsec policy enable <ltname
  94. vpn ipsec policy connect <ltname
  95. security advanced_network attack_checks configure
  96. security application_rules edit <ltrow_id
  97. security firewall custom_servic e edit <ltrow_id
  98. security firewall ipv4 edit <ltrow_id
  99. security firewall ipv4 enable <ltrow_id
  100. security firewall ipv6 edit <ltrow_id
  101. security firewall ipv6 configure
  102. security firewall ipv6 delete <ltrow_id
  103. security schedules add
  104. security schedules edit <ltrow_id
  105. security mac_filter source add
  106. security ip_or_mac_binding edit <ltrow_id
  107. security website_filter content_filtering configure
  108. security website_filter blocked_keywords add
  109. radius configure <ltradius_server
  110. history <ltlimit
  111. License list
DWC-1000 first page preview

DWC-1000

Brand: D-Link | Category: Controller
Related products
DWC-2000DSA-6100DSN-610DSN-640DHP-P339AVDHP-P610AVDHP-W610AVNuclias Connect Hub Plus DNH-200PowerLine DHP-W611AV
D-Link categories
Network Router
Switch
Wireless Router
Adapter
Network Hardware
Security Camera
Wireless Access Point
Modem
Extender
IP Camera
More D-Link categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved