Wireless Controller User Manual282Chapter 10. Advanced SystemFunctionalities10.1 USB Device SetupSetup > USB Settings > USB StatusThe DWC-1000 Wireless controller has a USB interface for printer access, file sharing. USB Mass Storage: also referred to as a “share port”, files on a USB disk connectedto the DWC can be accessed by LAN users as a network drive. USB Printer: The DWC can provide the LAN with access to printers connectedthrough the USB. The printer driver will have to be installed on the LAN host andtraffic will be routed through the DWC between the LAN and printer.To configure printer on a Windows machine, follow below given steps:1. Click 'Start' on the desktop.2. Select ‘Printers and faxes’ option.3. Right click and select 'add printer' or click on 'Add printer' present at theleft menu.4. Select the 'Network Printer' radio button and click next (select "device isn'tlisted in case of Windows7").5. Select the 'Connect to printer using URL' radio button ('Select a sharedprinter by name ‘in case of Windows 7) and give the following URL http://<controller’s LAN IP address>:631/printers/ (Model Name canbe found in the USB status page of controller’s GUI).6. Click 'next' and select the appropriate driver from the displayed list.7. Click on 'next' and 'finish' to complete adding the printer.
