Zenith SM3547R Operating Manual & Warranty

Zenith SM3547R Operating Manual & Warranty Manual pdf 11 page image

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERA. Plug your TV into an unswitched AC power source.B. Turn the TV ON by pressing OFF-ON.Do not plug TV into switched outleton cable-TV decoder or VCRSTEP 2. SELECT YOUR VIEWING SOURCEA TV source refers to the equipment connected to the TV thatsupplies the picture and sound to your TV. You select theviewing source by using the SOURCE MENU.To Access SOURCE MENU1. Press SOURCE on the remote control to view theSOURCE MENU.2. Press SOURCE repeatedly until the desired source is50UREE[ANT/CABLE 1ANT/CABLE 2VIDEO 1VIDEO 2S-VIDEO 1VIDEO 3S-VIDEO 2highlighted.3. Press ENTER to return to normal viewing.STEP 3. USE AUTO PROGRAMWhen your TV is first turned on, you will see the SETUPMENU with AUTO PROGRAM highlighted. AUTO PRO-GRAM finds all available channels from the selected sourceand stores them in the memory of the TV. To activate AUTOPROGRAM, press ADJUST (ADJ) Left!Right.NOTE: The antenna or cable must be connected to the TV be-fore using AUTO PROGRAM to fred available channelsIAUTOPROGRAMCH.ADD/DELCH.LABELSTUNINGBANDAUTOTUNINGSOURCEIDCLOCKSETCAPTIONSII STARTSetup Menu with Auto Program HighlightedSTEP 4. TIME FUNCTIONSSet Clock In TV1. Press Menu until the SETUP MENU is selected.2. Press SELECT (SEL) to highlight CLOCK SET thenuse the number buttons on the remote to enter thecorrect time.3. Select AM or PM using the TIMER key on the remote.4. Press ENTER (ENT) to start the clock.AUTOPROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTOTUNINGSOURCEIDCLOCKSETCAPTIONS]I 10:00AMSelecting Clock Set(continued on next page)273_o 2 m 1