Z Corporation Z810 System User Manual

Contents

Z Corporation Z810 System User Manual Manual pdf 38 page image

Z Corporation Z810 System User Manualwww.zcorp-users.com 384.8 CHECK FLUID LEVELS4.8.1 BINDER CONTAINERSCheck the fluid levels on the binder and wastecontainers. It is good practice to fill the binderbottles when they are half empty.The color binder containers can hold half agallon (2 liters) of color binder. The large clearbinder container can hold up to five gallons (20liters) of clear binder.To fill the binder bottles:1. Unscrew the top cap.2. Fill container with binder.3. Replace cap.PLEASE NOTE: Binder level sensors willindicate via the software when the binderlevel is low. For color binder, the sensorswill indicate a low level when it reachesone liter of fluid. For clear binder, thesensors will indicate a low level when itreaches six liters of fluid. These amountsare enough to complete a large build. Thewarning will appear before the printerbegins a build so that you may fill up thebinder bottles to prevent errors in the printjob and damage to the printer.PLEASE NOTE: If the printer will beprinting in monochrome mode only, fillcolor containers with distilled water. SeeSection 12.2, Flush System with DistilledWater.