INTRODUCTIONMOTO MAN 1-3 MH-Series Positioner Manual with MotoMount1.2.3 System Layout – Type IThe Type I MH-Series positioner kits include four drive assemblies: MH75,MH150, MH450, and MH1500. The kits are available in four basic mechanicalconfigurations: the drive assembly, the drive assembly with MotoMount, theheadstock positioner assembly, and the head and tailstock positioner assembly.These are combined with the appropriate single or multiple external axis controlpackages to provide a complete positioner kit.The major components of a typical Type I headstock and tailstock positionerassembly (MHT) are shown in Figure 1-1.Figure 1-1 MHT System Layout – Type I1.2.4 System Layout – Type IIThe Type II MH-Series positioner kits include two drive assemblies: MH1000 andMH3000. The kits are available in four basic mechanical configurations: the driveassembly, the drive assembly with motomount, the head stock positioner assembly,and the head and tailstock positioner assembly. These are combined with theappropriate single or multiple external axis control packages to provide a completepositioner kit.The major components of a typical Type II headstock and tailstock positionerassembly (MHT) are shown in Figure 1-2.DRIVEASSEMBLY MOTOMOUNTHEADSTOCKCOMPONENTSAC SERVOMOTORMOTOMOUNTTAILSTOCKCOMPONENTSTAILSTOCKCOLUMNSTANDARDTOOL RADIUS(SEE SPEC.TABLE 3-1)
