Scanning132 WorkCentre 7220/7225 Multifunction PrinterUser GuideSelecting Layout AdjustmentsLayout adjustments provide additional settings for the size and orientation of the original, and erasingthe edges.To select layout adjustments:1. Press the Services Home button, then touch Workflow Scanning.2. Touch the Layout Adjustment tab.3. To specify the orientation of the original image:a. Touch Original Orientation.b. On the Original Orientation screen, select an option:• Upright Images and Sideways Images refer to the direction the originals are loaded inthe document feeder.• Portrait Originals and Landscape Originals refer to the images on the originals.c. Touch OK.4. To scan the correct area of the original image:a. Touch Original Size.b. On the Original Size screen, select an option:• Auto Detect allows the printer to determine the size of the original.• Preset Scan Areas specifies the area to scan when it matches a standard paper size. In thescrolling list, touch the desired paper size.• Custom Scan Area allows you to specify the height and width of the area to scan. Touchthe Height-Y and Width-X arrows to specify the area.• Mixed Size Originals allows you to scan standard-size originals of varying sizes. Use thediagram on the screen to determine which original sizes can be mixed in the same job.c. Touch OK.5. To specify the amount to erase from the edges of your image:a. Touch Edge Erase.b. On the Edge Erase screen, select an option:• All Edges erases all four edges by the same amount. Touch the All Edges arrows to specifythe amount to erase from the edges.• Individual Edges specifies different amounts for the edges. Touch Side 1, then use thearrows to specify the amount to erase from each edge. Touch Side 2, then use the arrowsto specify the amount to erase from each edge, or touch Mirror Side 1.c. Touch OK.6. To manage how the scanner treats blank pages:a. Touch Blank Page Management.b. Select an option:• Include Blank Pages includes scanned pages that are blank.• Remove Blank Pages omits scanned pages that are blank.c. Touch OK.
