Installation and SetupXerox ® WorkCentre® 6655/6655i Color Multifunction Printer 49User GuideInstalling Print Drivers and Utilities for Macintosh OS X Versions 10.7 andLaterTo access all the features of your printer, install the Xerox ® print driver and the Xerox ® scan driver.To install the print and scan driver software:1. Insert the Software and Documentation disc into the appropriate drive on your computer.2. Open Xerox ® Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.3. To run Xerox ® Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.4. When prompted, click Continue.5. To accept the license agreement, click I Agree.6. To accept the current installation location, click Install, or select another location for the installationfiles, then click Install.7. Enter your password, then click OK.8. From the list of discovered printers, select your printer, then click Next.If your printer does not appear in the list of discovered printers:a. Click the Network Printer Icon.b. Type the IP address of your printer, then click Continue.c. Select your printer in the list of discovered printers, then click Continue.9. To accept the print queue message, click OK.10. Select or clear the Set Printer as Default and Print a Test Page check boxes.11. Click Continue, then click Close.Note: The printer is added automatically to the printer queue in Macintosh OS X versions 10.7 andlater.To verify the installation of printer options with the print driver:1. From the Apple menu, click Printer Preferences > Print & Scan.2. Select the printer in the list, then click Options and Supplies.3. Click Driver, then confirm that your printer is selected.4. Confirm that all of the options installed on the printer appear correct.5. If you change settings, click OK, close the window, then exit System Preferences.
