SecurityWorkCentre 7755/7765/7775 Multifunction PrinterSystem Administrator Guide59Note: If your printer is locked, you must log in as a system administrator. For details, see AccessingCentreWare IS on page 17.1. In CentreWare IS, click Properties > Security > Access Rights > Setup. The Step 1 of 3 windowdisplays.2. If this is the first time you have configured authentication, click Next otherwise, click EditMethods.3. Under Device User Interface Authentication, select Xerox Secure Access, or Common AccessCard (CAC)/Personal Identity Verification (PIV).4. Under Web User Interface Authentication, select Locally on the Device (Internal Database) orRemotely on the Network to specify how the printer will validate the user's rights to accessCentreWare IS.5. If a user normally authenticates at the control panel with a card reader, you must specify amethod for the printer to authenticate users who access CentreWare IS from their computer. Ifyou select Remotely on the Network, you must configure a network authentication server.6. Under Authorization, select Locally on the Device (Internal Database), or Remotely on theNetwork.7. Click Next.8. Type the Feature Enablement Key if you are using CAC, then click Next. The key is provided withthe CAC kit.9. Click Configure next to Device User Interface Authentication.10. Configure the Remote Server. For instructions, refer to the information provided with your serverhardware.After the server is configured, the server communicates with the printer and automaticallycompletes the configuration process.11. If required, click Manually Configure to manually configure communication, personalizeinstructional windows, and review accounting options. For details, see Manually ConfiguringControl Panel Authentication on page 59.12. If you selected Remotely on the Network for the Web User Interface Authentication method,click Configure next to Web User Interface Authentication. Configure the authentication serversettings. For details, seeNetwork Authentication on page 56.13. Click Finish.Manually Configuring Control Panel AuthenticationIf you are using a card reader system, and you want to allow users to access the printer when they havelost or misplaced their identification card, you can configure the printer to allow them to log in at thecontrol panel. In this case, the remote server still has the responsibility for authenticating the user.Before you begin, ensure that the Xerox Secure Access authentication server has been configured topoint to the printer.1. At the Authentication Configuration screen click the Configure button next to Device UserInterface Authentication Xerox Secure Access.2. If the Authentication Solution has been configured correctly the Authentication Solution serveraddress information displays. If the information is incomplete or incorrect, click ManuallyConfigure.
