FaxWorkCentre 7755/7765/7775 Multifunction PrinterSystem Administrator Guide1345. On the Defaults page, you can change other settings such as:• Server Fax has the following setting that can be adjusted; 2-Sided Scanning, Content Type,How Original was Produced and Resolution.• Image Quality has the following setting that can be adjusted; Lighten/Darken andSuppression.• Layout Adjustment has the following setting that can be adjusted; Original Orientation andOriginal Size.• Filing Options has the following setting that can be adjusted; Delay Start.To change any feature settings, within each setting area click the Edit button, select the feature to bechanged and click the Save button to return to the Server Fax: Defaults screen.Troubleshooting Server FaxNotes:• Configure your printer on the network or resolve any networking issues beforeattempting to use the Server Fax feature.• Server Fax and Embedded Fax cannot be running at the same time. If one is enabled, theother will not function.If you are experiencing problems sending a fax from the control panel, check the following:1. Verify the printer is installed and functioning on the network. See The Installation Wizard onpage 15.2. Verify TCP/IP is enabled. See Enabling TCP/IP on page 22.3. Ensure Fax settings are configured. See Configure Server Fax Default Settings on page 133.4. Ensure the Server Fax File Repository is setup correctly. See Configure a Server Fax FilingRepository on page 131.5. Verify the user account and password created for the Server Fax feature are correct and have theappropriate permissions to create directories and write files to the filing location.See also: For more help, see the Online Support Assistant atwww.xerox.com/office/WC7755_WC7765_WC7775support.
