User Guide 39Special MediaPrinting on letterhead paperLetterhead paper can be printed on one side or two sides. Refer topage 14 for the weights and sizes of paper you can use.1. You can either: Place the letterhead paper in the standard paper/transparency tray (with the tray switch set to Paper) or a highcapacity paper tray.One-sided job ó place the letterhead paper face up with theletterhead towards the front of the tray.Two-sided job ó place the letterhead paper face down withthe letterhead towards the back of the tray. Choose to manually feed the paper. Donít place the paper inthe manual-feed slot until you are prompted by the printerísfront panel to do so.2. In the printer driver: Select the tray containing the letterhead paper orManual Feed-Paper. Select either one-sided printing or two-sided printing.3. Send the job to the printer.4. If you selected Manual Feed-Paper, wait until the printerís frontpanel prompts you before inserting the paper.One-sided job ó Place the letterhead paper face down with theletterhead entering the manual-feed slot first.Two-sided job ó Place the letterhead paper face up with theletterhead entering the manual-feed slot last.Wait until you are prompted again before adding the next sheet ofpaper.
