24 PhaserÆ 8200 Color PrinterLoading Trays4. If you loaded transparencies, make sure that the tray switch on thefront-right side of the tray is set to Transparency (back position).If you loaded labels, make sure that the tray switch is set to Label(forward position).5. Slide the tray back into the printer.NoteDo not use two-sided printing for transparencies or labels.Loading the Optional Legal Paper TrayThe optional legal paper tray replaces the standard paper/transparencytray in the printer.You can refer to the labels inside the tray for paper-loadinginstructions.1. Pull out the tray.2. Load the print media.Transparency Label0726-78TransparencyLabelTransparencyLabel0726-81TransparencyLabelTransparencyLabel0726-06
