Xerox DocuPrint 4517 User Manual

Contents

Xerox DocuPrint 4517 User Manual Manual pdf 224 page image

X e r o x N e t w o r k I n t e r f a c e C a r d ( X N I C )C-56 v D o c u P r i n t 4 5 1 7 / 4 5 1 7 m p U s e r G u i d eInstalling the XNICNoteBe sure to refer to the XNIC Configuration Guide forimportant network connection instructions.1 Power OFF the printer and disconnect the power cord and any interface cables.• If installing the XNIC-T’RING, continue with Step 2.• If installing the XNIC-E’NET, skip to Step 4 on page C-57.• If installing the XNIC-L’TALK, skip to Step 5 on page C-57.2 Note the XNIC-T’RING serial number (A)and Token Ring address (B).This information will not beaccessible after the card is installed.3 Note the XNIC-T’RING data rate, whichis determined by the jumpers on the JX2pins (A).• Pins 1 and 2 are strapped together for4 mbps.• Pins 2 and 3 are strapped together for16 mbps.This information will not beaccessible after the card is installed.Skip to Step 5 on page C-57.hapterc.frm Page 56 Friday, July 11, 1997 9:25 PM