VISTA and VISTA WiFiVISTA and VISTA WiFiNote: If a VISTA or VISTA WiFi is docked in a USB or WiFi Base while the upgradeis being staged on the camera, the display does not show the staging process.While the upgrade is being staged on a VISTA or VISTA WiFi in a Transfer Station, thedisplay:l Storage Used meter fills with bars and Storage Percentage increasesl 8-character area scrolls DOWNLOADINGWhen the upgrade has finished staging, the Storage Used meter is full, the StoragePercentage shows 100%, and the 8-character area scrolls DOWNLOAD COMPLETE forabout 5 seconds.The next time you dock the camera in the USB Base, WiFi Base, or the Transfer Station, theupgrade is applied. While the upgrade is being applied, UPDATING DO NOT INTERRUPTscrolls on the display.Warning! DO NOT REMOVE the camera from the dock while its new firmware isbeing applied. Removing the camera from the dock during the upgrade can causethe camera to stop functioning.When the upgrade has finished applying, the camera sounds the camera ready alert(depending on your alert notification selections).VISTA XLTNote: If the VISTA XLT is docked in a USB or WiFi Base while the upgrade is beingstaged on the camera, the display does not show the staging process.While the upgrade is being staged on a VISTA XLT in a Transfer Station, the display:l First line reads Upgradel Second line shows the percentage of the upgrade alreadydownloaded next to a progress barl Third line reads DOWNLOADINGWhen the upgrade has finished staging on the camera, thepercentage downloaded and progress bar show 100%, and the third linereads DOWNLOAD COMPLETE for 5 seconds.If VISTA XLT is undocked and notrecording, and has an upgrade staged on the camera, theUpgrade Staged icon ( ) appears in the lower right corner ofthe display.VISTA Body CameraWGD00120 RevisionReviewDraft_11151841
