132 LightingPicture no: 17128t.tifDoor-to-door illuminationThe dipped beam and the reversing lightsilluminate for approx. 30 seconds after thedriver has exited the vehicle and closed hisdoor.To activate function:1. Switch off ignition.2. Remove ignition key.3. Open driver’s door.4. Pull turn signal stalk toward steeringwheel.5. Close driver’s door.If the driver’s door is left open, the lights willgo out after two minutes.The light is switched off immediately byinserting the key into the ignition or pullingthe turn signal stalk again with the driver’sdoor open.Picture no: 17129t.tifParking lightsThe front parking light and tail light of oneside of the vehicle can be activated whenparking:1. Set light switch to 7 or AUTO 3.2. Ignition off.3. Move turn signal stalk all the way up(right parking light) or down (left parkinglight).An acoustic signal sounds and controlindicator O illuminates briefly in theinstrument panel to indicate activation.Remove the ignition key before leaving thevehicle.To switch it off, switch on the ignition ormove the turn signal stalk in the oppositedirection.