Vatech PaX-i3D User Manual

Also see for PaX-i3D Smart: User manual Installation manual

Contents

Vatech PaX-i3D User Manual Manual pdf 19 page image

PaX-i3D Green (PHT-60CFO) User Manual192 Warnings and PrecautionsEmergency stop■ If a problem occurs during image acquisition, press the red emergencystop button to immediately stop all moving parts and cut off all power to theequipment.Trouble-free operation■ Never use this equipment in an environment that is susceptible to explosion.■ Always operate the equipment within a temperature range of 10 °C to 35 °C(50 ℉ to 95 ℉) for the safe operation. Image quality may deteriorate if theequipment is operated outside of this range.■ Always allow the equipment sufficient time to warm up (while switched on) ifit has been exposed to temperatures of below 10 °C (50 ℉).■ Only perform X-rays of patients if system is in full working order.■ Always ensure that equipment movement is not obstructed by the patient’sclothing, medical device (such as a wheelchair), or the patient themselves.■ Do not leave the patient unattended around the equipment.■ Remove all radio-controlled devices, mobile phones, etc. from the X-rayroom prior to image acquisition as these objects may cause the equipmentto malfunction.Modifying the equipment■ Modifying the equipment in any way which may affect the safety of theoperator, patient or other persons is prohibited by law.■ No part of this equipment is serviceable by the user. All maintenanceand repair of this equipment must be performed by a qualified servicetechnician.■ This product may only be operated with original VATECH accessories orthird-party accessories expressly approved by VATECH.