5INSTALLATION DIMENSIONSFigure 1DRAIN INSTALLATIONPLEASE READ all instructions completely before attemptingto install or operate the unit. All Ice Makers require a con-nection to the water supply and improper hook-up canresult in substantial property damage! All water and drainconnections MUST BE made by a licensed/qualified plumb-ing contractor. Failure to follow recommendations andinstructions may result in damage and/or harm.Plumbing installation must observe all state and localcodes. All water and drain connections MUST BE made bya licensed/qualified plumbing contractor. Failure to followrecommendations and instructions may result in damageand/or harm.The CLR2060 can be installed using a gravity drain or can use a fac-tory installed or equivalent drain pump.CAUTIONOFFONUL20214-15/16"(37.9)34-1/8"(86.7)FULLRETRACTHEIGHTWATERDRAINWATERVALVEWATEROUTLET4.5"(11.4)24"(61)21-3/4"(55.2)