U-Line CLR2060 User Manual

Also see for ECHELON CLR2060: Supplementary guide Supplementary guide Supplementary guide Service and parts manual Features & benefits

Contents

U-Line CLR2060 User Manual Manual pdf 20 page image

18User’s ManualDOOR ADJUSTMENTYour door is aligned at the factory before shipment. Occasionalre-adjustment may be necessary, especially if an Overlay Panel isinstalled. The following procedure will correct for up to 1/4" alignment.The door should never be flush with the top of the cabinet.Even when level, the top edge of the door will be 1/8" belowthe top of the cabinet (Figure 17).To adjust :1. Compare the top edge ofthe door (opposite thehinges) to the top edge ofthe cabinet and note thetype (up or down) of adjust-ment needed.2. Remove the top hingepivot pin with a 7/64" hexwrench (Figure 18) and liftdoor off bottom hinge pin.Be careful not to lose doorclosers (Figure 20).3. With door upside-down, loosenbut do not remove the two hingeplate screws.1/8"DOOR001Figure 17UL310Figure 18