Toshiba TXZ+ TMPM4MNFYAFG Reference Manual

TXZ+ FamilyTMPM4M Group(1)Clock Control and Operation Mode2022-06-24Rev. 1.162 / 64The reset factor and the reset rangeReset factors and the range initialized are shown in Table 3.1.Table 3.1 The reset factor and the range initializedRegisters andPeripheral functionReset factorsColdReset Warm ResetPOR ResetPinOFDResetWDTResetLVDResetCPURESETREQ>ResetCPULOCKUPResetPORFResetResetsignalnamePORHV RESET_N OFDRSTOUTWDTRSTOUTLVDRSTOUTSYSRESETREQLOCKUPRESETREQPORFRESETReset flag [RLMRSTFLG0][RLMRSTFLG1]  - - - - - - -InterruptControl[IANIC00]        [IBIMCxxx][IBNIC00]        FLASH [FCSBMR]  (Note2) - - (Note2) - - Port All the registers        OFD        LVD   - - - - - -Debugging interface  (Note2) - - (Note2) - - Except the above        : It is initialized.-: It is not initialized.Note1: When reset is performed, the data of built-in RAM will not be guaranteed.Note2: [FCSBMR] and Debugging interface are not initialized by resetting in NORMAL and IDLEmode, but they are initialized by resetting in STOP1 mode.

/ 64

Related manuals for Toshiba CG-M4M(1)-E