Toshiba HV6FS Instruction Manual

Page 26 DISPOSALMAINTENANCE PROGRAMIn order to ensure continued reliable and safeoperation of the equipment, a program ofperiodic maintenance must be established.Operating and environmental conditions willusually dictate the frequency of inspectionrequired. NFPA Publication 70B "ElectricalEquipment Maintenance" may be used as aguide for setting up the maintenance program.Contact with energizedcomponents can causesevere injury, death andproperty damage. Turn offand lock-out primary andcontrol circuit power beforeservicing.Improper maintenance cancause severe injury, deathand property damage. Onlyqualified and authorizedpersons are to install,operate or service thisequipment.Grease is conductive. Donot allow grease or anyother substances tocontaminate insulatingmaterials. Contaminatedinsulators can allow ashort-circuit or groundfault to occur.NOTE: Refer to the SAFETY section of thismanual for important information.MAINTENANCE RECORDKeep a permanent record of all maintenancework. At a minimum, this record should includeinformation on:1) Items inspected2) Reports of any testing3) Equipment condition4) Corrective actions or adjustments5) Date of work6) CommentsThe degree of detail of the record will dependsomewhat on the operating conditions.SERVICING EQUIPMENTFor your safety, turn off and lock out main andcontrol circuit power before servicing the circuitbreaker. Certain minimum safety proceduresmust be followed:1) Only qualified personnel should attemptthis service.2) Never perform service on or next toexposed components energized with linevoltage.Failure to adhere to thesesafety procedures canresult in severe injury,death and propertydamage.WARNINGDANGERWARNINGWARNINGPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com