DST-3000 Receiver’s Menu SystemPage 7-17DoneHighlighting the Done button on the screen and pressing the key on the remote controlcauses an exit from the Caller ID List screen and a return to the MAIN MENU screen.VideoHighlighting the Video button on the screen and pressing the key on the remote controlwill return you to the last program you were viewing.DisableHighlighting the Disable button on the screen and pressing the key on the remote controlwill prevent the display of the Incoming call from pop-up screen whenever an incomingtelephone call arrives.Call HistoryOn the right is displayed the Call History, which displays two lines of information for eachincoming caller: Today or a date, the Time of the most recent telephone call from that caller,the Number of Telephone Calls from that Caller since the screen was last displayed, and theTelephone Number of the Caller. These lines of information are displayed with the latesttelephone call shown first.HelpThe Help button takes you to the ASSISTANCE screen. It should be your first stop when youneed help or have a question. Think of this feature as a quick reference manual.Lock/UnlockWhen you first receive your satellite system, it will be unlocked (that is, no limits or restrictionsare in effect). To enforce the limits (spending, ratings, and “Family” favorite list), you must lockthe system.When the button on the MAIN MENU reads Lock, no lock symbol appears at the top of the menuscreen, indicating that the system is unlocked.NOTE: Once the DST-3000 receiver is locked, only channels selected on theFamily list will be accessible. If the Family list does not have channels selectedon it, no channels can be viewed without first unlocking the DST-3000 receiver.To avoid this inconvenience, verify the contents of the Family list before lockingthe DST-3000 receiver. For additional information, refer to “Channel Lists”earlier in this chapter.SELECTSELECTSELECT