Always check the positive/negative symbols on the batteries to ensure they are inserted correctly.•Don’t forget to get rid of old batteries safely. Check with your local council for how you should get rid•of batteries. Never put batteries on a fire or in the bin with normal household waste.Note:A label with support information is located on the back of the remote control.•qwePackage ContentsInserting the Batteries into the Remote ControlConnecting Equipment to the Rear of the RecorderHDR5010KBQUICK START MANUAL© 2010 Toshiba Corporationq Digital TV recorder w Remote control e Batteries (2xAAA/R03) r AC mains adaptort Owner’s manual y Quick start guide u Help leafletqw ertq Plug your aerial lead into the RF IN socket of the recorder.w Plug the RF cable between the RF OUT socket of the recorder and your TV, Video or DVDrecorder. Cable not supplied.e Plug a HDMI cable between the HDMI OUT socket of the recorder and your TV. Cable notsupplied.r Plug the supplied AC mains adaptor between the power socket of the recorder and a standardwall socket. Only switch on the wall socket when all cables have been attached.Please refer to page 9 of the User Guide for information on connecting equipment usinga HDMI cable, a SCART cable, a USB Flash drive or an audio system using a SPDIF cable.rw eqyuDigital TV recorderHDR5010KBQUICK START GUIDE© 2010 Toshiba CorporationHD5010KB Quick Start Guide.indd 1 8/6/10 08:48:34