Toshiba D-R4SC Owner's Manual

Also see for D-KR4: Owner's manual

Contents

69Editing OthersIntroduction Function setupRecording PlaybackNotes• Some discs allow you to change audio selections only via the disc menu. If this is the case, press MENU button andchoose the appropriate language from the selections on the disc menu.• When you turn on the recorder or replace a disc, the recorder returns to the initial default setting. ( page 110)Depending on a disc, a specific type of audio the disc has is output.• Immediately after you have switched sounds, there may be a temporary discrepancy between the display and actualsound.• The BITSTREAM/PCM jack may not output SAP sound you select. In this instance, set “Audio out select” to “PCM”.( page 114)• You cannot change SAP sound if recorded with “DVD compatible mode” ( page 33) set to “Main”. Even when “DVDcompatible mode” ( page 33) is set to “Off,” the recorder regards it as “Main” when recording to a DVD-R/RW disc.Output sound conversion tableLinearPCM48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit96 kHz/16 bit96 kHz/20 bit96 kHz/24 bitBitstream Analog 2ch PCMBITSTREAM/PCM jackBitstream48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit———BitstreamBitstream44.1 kHz/16 bit44.1 kHz/16 bitBitstreamBitstream48 kHz/16 bitBitstreamBITSTREAM/PCM jack48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit—48 kHz/16 bit44.1 kHz/16 bit44.1 kHz/16 bitBitstream48 kHz/16 bit48 kHz/16 bit48 kHz/16 bitAnalog (L/R)jacks48 kHz/20 bit48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit—48 kHz/16 bit44.1 kHz/16 bit44.1 kHz/16 bit(Noise)48 kHz/20 bit48 kHz/16 bit48 kHz/16 bitAnalog (L/R)jacks48 kHz/20 bit48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit96 kHz/16 bit96 kHz/20 bit96 kHz/24 bit—48 kHz/16 bit44.1 kHz/16 bit44.1 kHz/16 bit(Noise)48 kHz/20 bit48 kHz/16 bit48 kHz/16 bitAnalog (L/R)jacks48 kHz/20 bit48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit48 kHz/16 bit48 kHz/20 bit48 kHz/24 bit—48 kHz/16 bit44.1 kHz/16 bit44.1 kHz/16 bit(Noise)48 kHz/20 bit48 kHz/16 bit48 kHz/16 bitAudio setting ( page 114) and output in the default setting displayDiscDVD-videodisc*VIDEO CDAudioCDDVD-RAM/RW/RCD-R/RW• Do not select a connection or setting indicated as “Noise” in the above list.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.* “DVD video disc” above does not include DVD-R/RW discs recorded on this recorder.Sound formatDolby DigitalDTSMPEG2MPEG1Linear PCM 44.1 kHz/16 bitDTSDolby DigitalLinear PCM 48 kHz/16 bitMPEG2MP3/WMABITSTREAM/PCM jackBitstream48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bit48 kHz/16 bitBitstreamBitstream44.1 kHz/16 bit44.1 kHz/16 bitBitstreamBitstream48 kHz/16 bitBitstream44.1 kHz or 32 kHz or 48 kHz/16 bit