37PlaybackRecording Editing OthersIntroduction Function setupTo stop recordingPress STOP.To pause recording (to omit an unnecessaryportion)During recording, press .To resume recording, press it again.To change a TV channel to be recorded1) During recording, press .Recording pauses.2) Press CH or the number buttons to change thechannel.3) Press to resume recording.To view a TV program while recording another1) Start recording on this recorder.2) On a connected TV, select the TV mode.3) Using the channel selector of the TV, select adesired channel on the TV.To set an end time of a recording which is inprogress1) During recording, press QUICK MENU.Quick Menu appears.2) Press / to select “End time” then pressSELECT/ENTER.The display changes as follows:e.g.3) Press / to select an item then pressADJUST to change the value.4) Press SELECT/ENTER.Notes• By setting an end time, it is memorized as a programmedone, and the indicator in the front panel displayilluminates to indicate that the recorder holds a timerprogram of recording.• The programmed end time must be set for 5 minutes laterthan the current time.To play a title recorded on a DVD-RAM discwhile recording another on the same disc(Recorded Title Play) DVD-RAMDuring recording, you can play a title recorded on thesame disc.1) While recording on a DVD-RAM disc, pressEASY NAVI.2) Press / / / to select “Play Contents”,then press SELECT/ENTER.3) Press / / / to select a desired title, thenpress SELECT/ENTER.Playback of the selected title starts.Pressing STOP button stops playback, and thecontent currently recorded returns. If you pressPLAY button, playback resumes from the locationyou last stopped.Notes• The playback picture may appear after a delay of severalseconds.• While you are using this function, the following operations/functions are not available.- Programmed playback (repeat playback, etc.)- Editing (Playlist programming, dubbing, title/chapternaming, title thumbnail setting, etc.)• Depending on the data condition, playback may pause.• When the recording mode is set to “XP” or “AT” (when ahigh bit rate is automatically set. page 42), this functionis not available.Creating chapters automatically at regularintervalsSet “DVD-Video:CHP create” ( page 33).2 :13 pmEnd time