Toshiba AW-G9930S Service Manual

– 23 –8-2. DISASSEMBLY INSTRUCTIONSWhen reassembling, perform the disassembling procedures in reverse order unless otherwise specified.Parts Procedure ( : Notes) Illustrations(1) Programtimer1) Open the lid and remove 2 caps on thecontrol panel with a screwdriver (-), etc..Then remove 2 screws under the caps.(Photo. 1)2) Slide the control panel to the right and lift upit the right end with both hands. Remove itfrom the top cover. (Photo. 2)3) Remove 6 connectors of the lead wire unit.(Photo. 3)4) Remove 2 program timer mounting screws.Then remove the program timer from thecontrol panel. (Photo. 4)* The program timer is susceptible to staticelectricity and may be damaged. So, alwaysdischarge the electricity before repairing.* Put on gloves when making inspection anddisassembling.Refer to page 11Perform in the same way when replacingelectrical parts.* When assembling, following notes arenecessary for arranging the lead wires.Note 1 : Match each lead color.Note 2 : Take care that timer lead wires are notpinched by other parts, causingmisoperation of their switches.Note 3 : Take care the lead wires are not jammedbetween the top cover and the controlpanel.(Photo. 1)(Photo. 2)(Photo. 3)(Photo. 4)WARNINGUNPLUG POWERx Unplug the power cord for the work unnecessary to power on like disassembling.Do not hold the plug by a wet hand.Failing to unplug may cause an electric shock.All manuals and user guides at all-guides.com