Toshiba 32W153 DB Series Online Manual

Also see for 32D153*DB: Starting guide

English - 10 -EnglishConnecting External EquipmentBefore connecting any external equipment, remove the mains plug from the wall socket.(*) Number of these inputs may change according to the model of your TV.Before running first time installation, any connected devicesneed to be set to standby mode.Aerial cable:................................................................Connect the aerial to the ANT. socket on the rear of the TV.SCART lead:..............................................................If you use a decoder* or a media recorder, it is essentialthat the scart cable is connected to the TV.The DIGITAL AUDIO socket enables the connection of asuitable surround sound system.HDMI® (High-Definition Multimedia Interface) is for usingwith a DVD decoder or other equipment with digital audio andvideo output. It is designed for best performance with 1080iand 1080p high-definition video signals but will also acceptand display VGA, 480i, 480p, 576i, 576p and 720p signals.PC format signals will also be displayed.Note: Although this TV is able to connect to HDMI equipment,it is possible that some equipment may not operate correctly.You can use YPbPr to VGA cable (not supplied) to enableYPbPr signal via VGA input.Note: You cannot use VGA and YPbPr at the same time.A wide variety of external equipment can be connected to theTV; therefore, the relevant owner’s manuals for all additionalequipment must be referred to for exact instructions.If the TV automatically switches over to monitor externalequipment, return to normal TV by pressing the desiredprogramme position button. To recall external equipment,press “SOURCE - ” button repeatedly to switch betweensources.Regardless of source’s property, audio output from theDIGITAL AUDIO socket cannot be copied.