C-7APPENDIX CX5 Enable Enable OK, RING, NO CARRIER, ERROR,NODIALTONE, BUSY, CONNECT, RRING, NO BONGTONE,DELAYED, BLACKLISTED, REORDER,WARBLE, CALL WAITING DETECTEDDial tone detectDisabled: The modem dials a call regardless of whether it detects adial tone.Enabled: The modem dials only upon detection of a dial tone, anddisconnects the call if the dial tone is not detected within10 seconds.Busy tone detectDisabled: The modem ignores any busy tones it receives.Enabled: The modem monitors for busy tones.Result Codes:OK n=0,1,2,3,4,5ERROR OtherwiseZn Recall stored profileThe modem performs a soft reset and restores (recalls) the configura-tion profile according to the parameter supplied. If no parameter isspecified, zero is assumed. Either Z0 or Z1 restores the profile.Result Codes:OK n=0,1ERROR Otherwise&Cn Data Carrier Detect (DCD) controlData Carrier Detect is a signal from the modem to the computerindicating that a carrier signal is being received from a remote modem.DCD normally turns off when the modem no longer detects the carriersignal.Appendix C
