Toshiba 19SL410U Owner's Manual

Also see for 19SL410U: Owner's manual Specifications Energy guide

Contents

32Chapter 6: Using the TV’s featuresIn Select Mode, when you stop on an item in theChannel Browser™, it will be highlighted but youmust press to tune the TV to the highlighteditem.2 Press to tune the TV to the highlighted item.3 Press to close the Channel Browser™.Adding and clearing channels andinputs in the History ListAdding channels and inputs to the HistoryList:As a channel or input is tuned, the ChannelBrowser™ adds it to the History List and displays iton the “right side” of the Channel Browser™.Previously tuned channels/inputs are “shifted” to theleft, eventually moving off the left side. Press tosurf backward through the previously tuned channels/inputs. Any channel or input that is tuned repeatedlywill not be repeated in the History List, but instead ismoved to the end of the list on the right side of theChannel Browser™.The Channel Browser™ will store the followingchannels:• All channels that are tuned using the numericbuttons on the remote control.• All channels that are tuned using or on theremote control.Note: Whenever an item is selected that cannotbe tuned (for various reasons), the TV willautomatically tune to the previously viewedchannel or input.Clearing channels from the History List:• Reconfiguring the ANT/CABLE input will clear theHistory List.Note: See page 24 for details on configuring theantenna input.• Once 32 channels or inputs are stored in the HistoryList, the oldest item will be removed from the listwhen a new channel or input is tuned.• Turning off the TV will clear the History List.Setting the Channel Tuning ModeThis feature allows you to choose how tuning will behandled for analog and digital channels when the TVis in Antenna mode.Note: To use this feature, the InputConfiguration must be set to Antenna (page 24).The channel tuning mode has three options.To set the Channel Tuning Mode:1 From the Setup menu, highlight Installation andpress . A new set of Installation menu iconswill appear.2 Open the Terrestrial menu, highlight ChannelTuning Mode, and then press X to select yourdesired mode.Note:• The Channel Options windows as well as theChannel Browser ANT/CABLE list will beupdated automatically when you change themode. Also, the History List will be cleared, butthe Favorites List will be saved.• Even if the Channel Tuning Mode is set toDigital, analog channel 3 remains the defaultchannel in the event no digital channels werefound in prior channel scans. (Channel Optionswill not have anything listed until a scan isdone.)Tuning to the next programmedchannelTo tune to the next programmed channel:Press or on the remote control or TV controlpanel.Note: This feature will not work unless youprogram channels into the TV’s channel memory( page 24).Tuning to a specific channel(programmed or unprogrammed)Tuning analog channels:Press the Channel Number (0-9) on the remotecontrol. For example, to select channel 125, press 1,2, 5, then .Tuning digital channels:Mode DescriptionStandard Both analog and digital channels can betuned normallyAuto(default)Digital channels will have priority whenmanually entering a channel numberusing the Channel Number (0-9) on theremote control, analog channels can stillbe tuned by / , if availableDigital Only digital channels can be tuned