77Using the TV’s featuresUsing the Auto Aspect featureUsing the Auto Aspect featureWhen this feature is set to On, the TV will automatically select thepicture size when one of the following input sources is received:❖ A 480i, 480p, 720p, 1080i digital signal from theANT/CABLE input❖ A 480i signal from the ColorStream ® HD or Video input❖ 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal fromthe HDMI 1, HDMI 2, or HDMI 4 input.The auto aspect ratio feature is not applicable to the PC input.To turn on the auto aspect ratio feature:1 Press the MENU button and open the Picture menu.2 Highlight Theater Settings, and then press the ENTERbutton.3 In the Auto Aspect Ratio field, select On.4 To save the new settings, highlight Done, and then press theENTER button.To revert to the factory defaults, highlight Reset and then pressthe ENTER button.To turn off the Auto Aspect ratio feature, Select Off in step 3 above.Aspect Ratio ofSignal SourceAutomatic Aspect Size (automatically selected when AutoAspect is On)4:3 Normal 4:34:3 Letter Box TheaterWide 216:9 Full FullNot defined (no ID-1data or HDMI ® aspectdata)The current picture size you selected, see “Selecting the picturesize” on page 71.NOTE
