76 Using the TV’s featuresScrolling the TheaterWide® picture (TheaterWide 2 and 3 only)Scrolling the TheaterWide® picture(TheaterWide 2 and 3 only)You can set separate scroll settings for the TheaterWide 2 andTheaterWide 3 modes for each input.To set the scroll settings:1 Press the MENU button and open the Picture menu.2 Highlight Theater Settings, and then press the ENTERbutton.(Sample Image) Picture menu - Theater Settings selection3 In the Picture Size field, select either TheaterWide 2 orTheaterWide 3.You cannot scroll in any other mode.4 Press the ( arrow) button to select the Picture Scroll field.5 Press the ( / arrow) buttons to scroll the picture up anddown as needed.6 To save the new settings, highlight Done, and then press theENTER button.To revert to the factory defaults, highlight Reset and then pressthe ENTER button.The adjustment range is from -5 to +10.When receiving a signal at 480i resolution, the picture scroll functionmay have limited adjustment range.NOTENOTE
