20 IntroductionTV back panel connectionsdevice. HDMI ® connection is necessary to receive 1080psignals.3 PC/HDMI-1 (Audio) IN—PC audio input terminal is sharedwith an HDMI-1 analog audio input terminal, and its use canbe configured in the Audio Setup menu, see “Setting the PCAudio” on page 101.4 ANT/CABLE—Antenna input that supports analog (NTSC)and digital (ATSC) off-air antenna signals and analog anddigital cable TV (QAM) signals.5 Digital AUDIO OUT—Optical audio output in Dolby® Digitalor PCM (pulse-code modulation) format for connecting anexternal Dolby Digital decoder, amplifier, or home theatersystem with optical audio input.6 ANALOG AUDIO OUT—Analog audio outputs forconnecting an audio amplifier.7 ColorStream ® HD—High-resolution component video inputand shared composite video input, see “Connecting DVDplayer with ColorStream® & satellite receiver” on page 26.8 USB port—Accesses JPEG or MP3 files, or updates TVfirmware.Component/Standard (composite) video cables carry only videoinformation; separate audio cables are required for a completeconnection.(Sample Illustration) L5200U Series back panel connections1 USB port—Accesses JPEG or MP3 files, or updates TVfirmware. Component/Standard (composite) video cables carryonly video information; separate audio cables are required for acomplete connection.NOTE78465231Power Cord