Toshiba 120/150 Operator's Manual

Contents

8-5SpecificationsAcceptable originals Weight: 52 to 90 g/m 2 (14 to 23.9 lbs.)Size: A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 14")Capacity: Up to 30 sheetsPower supply Drawn from the copierWeight Approx. 3 kg (6.6 lbs.)Dimensions 498 mm (W) x 380 mm (D) x 110 mm (H)(19.6" (W) x 15" (D) x 4.3" (H))As a part of our policy of continuous improvement, TOSHIBA reserves the right to makedesign and specification changes for product improvement without prior notice. Theperformance specification figures indicated are nominal values of production units. Theremay be some deviations from these values in individual units.Using the ADF1. Make sure that no original is left on the original table.2. Adjust the original guides to the size of originals.3. Set the originals face up in the document feeder tray.•Before feeding originals in the document feeder tray, be sure to remove any staples orpaper clips from them.•Before placing curled or wavy originals into the document feeding tray, be sure to flattenthem. If not, original misfeeds may result.•The ADF ( ) indicator on the operation panel will light up. If this indicator does not lightup, the originals are not properly set or the ADF is not properly closed.•Badly damaged originals may misfeed in the ADF. It is recommended that such originalsbe copied from the original table.•Special originals such as transparency film should not be fed through the ADF, butshould be placed directly on the original table.