106-67641. To start the engine, move the traction pedal to Neutral,press the brake pedal, move the throttle lever to Fast, turnthe ignition key to On, and then turn the ignition key toStart; read the Operators Manual.2. To stop the engine, move the throttle lever to slow,disengage the PTO, set the parking brake, wait 5 minutes,turn the ignition key to Stop, and remove the key; read theOperators Manual.3. Read the Operators Manual.4. To engage the PTO, pull up on the PTO switch and moveit forward.5. To disengage the PTO, move the PTO switch back.6. To switch the transmission to high speed, raise theattachment lift and switch the speed control to High.110-32861. Power outlet 4. Power Take Off (PTO)2. Seat switch 5. Starter solenoid3. Ignition switch 6. Light KitBattery SymbolsSome or all of these symbols are on your battery1. Explosion hazard 6. Keep bystanders a safedistance from the battery.2. No re, open ame, orsmoking.7. Wear eye protection;explosive gases can causeblindness and other injuries3. Caustic liquid/chemicalburn hazard8. Battery acid can causeblindness or severe burns.4. Wear eye protection 9. Flush eyes immediatelywith water and get medicalhelp fast.5. Read the Operator’sManual.10. Contains lead; do notdiscard.106-20461. Power Take-off (PTO) 6. Low 11. Silencer switch 16. Slow2. Engage 7. Lock 12. Press the button 17. Continuous variable setting3. Disengage 8. Flow divider 13. Key switch 18. Engine coolant temperaturereset switch4. Transmission 9. Unlock 14. Engine—preheat5. High 10. Cruise control (optional) 15. Fast12