Tascam HS-P82 Owner's Manual

Also see for HS-P82: Software manual User guide Manual Release note Notice

Contents

Tascam HS-P82 Owner's Manual Manual pdf 48 page image

48 TASCAM HS-P827 – Mark and Locate FunctionsMark functionsAdding marksOne file (take) can have a maximum of 99 marks, includingautomatically-created marks.Use the following two methods to create marks.Push the• MARK key on the front panel.Use the auto marker function (see OPTION page on page•39.)Depending on the auto marker function, marks areautomatically added when a certain audio level is exceeded,at regular time intervals and when synchronization errorsoccur.Marks are named according to how they were made.MARK key: MARK XXAudio level: OVER XXAt time interval: TIME XXWhen a synchronization error occurs: UNLK XXThe following automatic marks cannot be turned ON orOFF.Recording start point: REC xxRecording end point: END xxPre-recordings start point: PRE xxUsing keys to locate to marksPress the Ô [Â] or [¯] key while pressing andholding the SHIFT key to locate to the previous or nextmark.Mark list screenTouch the Mark List button on the Home Screen to openthe MARK LIST screen.NAME button: Touch to reorder the marks by namedescending or ascending.TIME button: Touch to reorder the marks by time descendingor ascending.Mark name and mark time buttons: Touch to select themark.Locate buttons (“ ”): Touch one of these to locate tothe corresponding mark.LIST INFO button: Touch this to see a list of the number ofmarks by type in the currently selected take.RENUMBER button: Renumber the marks. Reorder marksby time ascending, and change the numbers at the endsof the mark names to reflect that order.DELETE button: When a mark is selected, touch the DE-LETE button to erase that mark.Edit button: When a mark is selected, touch the Edit buttonto edit that mark.Scroll buttons: Use these buttons to scroll to the beginningor end of the list or scroll one page (five lines) forwardor backward. You can also scroll through the list oneline at a time using the DATA dial.Locating to marksTouch the “ ” button to locate to that mark.Viewing mark informationTouch the LIST INFO button on the MARK LIST screen toopen the mark list information screen that shows a list ofthe number of marks by type in the currently loaded take.Touch the LIST INFO button again to return to the MARKLIST screen.NOTEAfter recording, the MARK LIST screen might show a TOTALnumber of marks that is 2 or 3 greater than the sum of the