Tascam HS-P82 Owner's Manual

Also see for HS-P82: Software manual User guide Manual Release note Notice

Contents

Tascam HS-P82 Owner's Manual Manual pdf 19 page image

TASCAM HS-P82 194 Connect the cable from the V-Mount external batteryadaptor (IDX C-EB (XLR) to the EXT DC INconnector on the left side panel.5 Insert the V-Mount battery into the V-Mountexternal battery adaptor (IDX C-EB (XLR).About the displayAdjusting the display anglePull the bottom of the display forward, as shown in thefollowing illustration, to allow the angle to be adjusted.Push the bottom of the display (at the TASCAM logo) backin to restore it to its flat position.CAUTIONDo not push the display screen itself.Adjusting the display and indicator brightnessTurn the DATA dial while pressing and holding the HOMEkey to adjust the brightness of the display, the PAUSE, RECand PLAY [CALL] keys and the SLATE indicator.Push and turn the DATA dial while pressing and holdingthe HOME key to adjust only the brightness of the colordisplay.Cautions on the displayThe display can easily be scratched, so do not use•pointed objects, including fingernail tips, to touch it.Always touch it with your fingers.Do not press the display forcefully with a finger or poke•it with a pen, toothpick or other pointed object. Doing socould scratch the display or cause malfunction.The display touch panel is comprised of a film and glass.•Do not apply a strong force to its surface. Doing so couldbreak the glass.When using the display, do not put a hand on the panel•or push around the display forcefully. Doing so couldprevent accurate position detection.Do not place anything on top of the display or otherwise•put weight on the same place for a long time. Doingso could cause the panel to warp or result in inaccurateposition detection.Do not apply a commercially available screen protection•film to the display. Doing so could prevent normaloperation.Slightly wipe the display with a soft dry cloth that does•not shed dust (e.g. a cleaning cloth). Avoid wiping with astiff cloth or rubbing with force. Doing so could damagethe surface of the LCD. Do not use benzene, thinner,manicure remover, alcohol or similar substances.NOTEThe display is produced with extremely high-precisionmanufacturing technologies. More than 99.99% of thepixels operate to specification. Less than 0.01% of thepixels may occasionally misfire or appear as red or blackdots.This has no effect on the recorded sound and does notconstitute a malfunction.3 − Preparation