Sony UP-DF750 Setup And User's Manual

Also see for FilmStation UP-DF750: Brochure Specification sheet Manual Brochure

27Adjustment and Setting Using a MenuAdjustmentAdjustmentAdjustment and SettingUsing a MenuYou can set the following items using the relevant menu:• Confirming information (Information) (page 29)• Adjusting the print quality (Print Quality) (page 29)• Calibration (Calibration) (page 32)• Selecting a gamma curve (Default Gamma) (page 34)• Settings for network and LCD panel (System Settings)(page 35)• Printing of quality control pattern or print test pattern(Test Print) (page 38)Notes• The next printout will be printed with the values mostrecently set. You cannot adjust the setting duringprinting. Once you have adjusted and stored the settings,the printer operates according to those settings until theirvalues are modified.• If no button is pressed for about 20 seconds afterpressing the MENU button, the indication automaticallyreturns to the standard screen. However, during IPaddress setting and during print image adjustment, theindication automatically returns to the standard screen ifno button is pressed for about 30 minutes. In this case, alladjustments made up to that point (input of IP addressvalues or print image adjustment settings) will be lost.