Sony STR-DN840 Operating Instructions Manual

Also see for STR-DN840: Limited warranty Quick setup guide Specifications Operating instructions Operating instructions

Contents

92US• When the front speakers are set to “Small”, thecenter, surround, and surround back/front highspeakers are also automatically set to “Small”.• If you do not use the subwoofer, the frontspeakers are automatically set to “Large”.x Crossover Freq. (Speakercrossover frequency)Lets you set the bass crossover frequencyof speakers that the speaker size has beenset to “Small” in the Speaker Settingsmenu. Measured speaker crossoverfrequency is set for each speaker after theAuto Calibration.1 Select the parameter under thespeaker on the screen for which youwant to adjust the crossoverfrequency, then press .2 Adjust the value, then press .x Test ToneLets you select the test tone type on the“Test Tone” screen.• To adjust the level of all speakers at the sametime, press 2 +/–. You can also use MASTERVOLUME on the receiver.• The adjusted value is shown on the TV screenduring adjustment.To output test tone from eachspeakerYou can output test tone from the speakersin sequence.1 Select “Test Tone”, then press .2 Select the type of test tone orspeaker you want, then press .• Off: The test tone is output from eachspeaker manually.• Auto: The test tone is output from eachspeaker in sequence.• Fix FL, Fix FR, Fix CNT, Fix SL, FixSR, Fix SB*, Fix SBL, Fix SBR, FixLH, Fix RH, Fix SW: You can selectwhich speakers will output the testtone.3 Adjust the speaker level for manualtest tone, then press .* “Fix SB” appears when only one surround backspeaker is connected.x Distance UnitLets you select the unit of measurement forsetting distances.• feet: The distance is displayed in feet.• meter: The distance is displayed inmeters.Audio Settings menuYou can adjust settings for the audio to suityour preference.x D.L.L. (Digital Legato Linear)The D.L.L. function is Sony proprietarytechnology that allows low quality digitalaudio signals and analog audio signals to beplayed back with high quality sound.• Auto 1: This function is available forlossy compression audio formats andanalog audio signals.• Auto 2: This function is available forLinear PCM signals, as well as lossycompression audio formats and analogaudio signals.• Off• This function may not work, depending on thecontent via a USB device, or a home network.• This function works when “A.F.D. Auto”,“Multi Stereo”, “2ch Stereo”, or “Headphone(2ch)” is selected. However, this function doesnot work in the following cases.– “FM TUNER” or “AM TUNER” input isselected.– Linear PCM signals with a samplingfrequency of other than 44.1 kHz are beingreceived.– Dolby Digital Plus, Dolby Digital EX, DolbyTrueHD, DTS 96/24, DTS-HD Master Audio,or DTS-HD High Resolution Audio signalsare being received.– During network function, signals with asampling frequency of other than 44.1 kHz isbeing received.TipsNotes