Sony STR-DN840 Operating Instructions Manual

Also see for STR-DN840: Limited warranty Quick setup guide Specifications Operating instructions Operating instructions

Contents

103USUsing the Remote ControlReassigning the inputbuttonYou can change the default settings of theinput buttons to suit the equipment in yoursystem. For example, if you connect a Blu-ray Disc player to the SAT/CATV jack onthe receiver, you can set the SAT/CATVbutton on this remote control to control theBlu-ray Disc player.You cannot reassign the TV, TUNER,BLUETOOTH, USB, HOME NETWORK, SENinput buttons.1 While holding down the inputbutton of which you want tochange the assignment, hold downTV ?/1.Example: While holding downSAT/CATV, hold down TV ?/1.2 With the TV ?/1 button held,release the input button.Example: With the TV ?/1 buttonheld, release SAT/CATV.3 Referring to the following table,press the corresponding button forthe category you want, thenrelease TV ?/1.Example: Press 1, then release TV ?/1.Now you can use the SAT/CATVbutton to control the Blu-ray Discplayer.a)For details on the BD1 or BD3 setting, referto the operating instructions supplied withthe Blu-ray Disc player or Blu-ray Discrecorder.b) Sony DVD recorders are operated with aDVD1 or DVD3 setting. For details, referto the operating instructions supplied withthe DVD recorders.c)Sony VCRs are operated with a VTR 3setting which corresponds to VHS.Using the Remote ControlNoteNumericbuttonsTV ?/1InputbuttonsCategories PressBlu-ray Disc player(command mode BD1)a) 1Blu-ray Disc recorder(command mode BD3)a) 2DVD player(command mode DVD1)3DVD recorder(command mode DVD3)b) 4VCR(command mode VTR3) c) 5CD player 6