Menu
Sony SRS-X99 Help Manual
Also see for SRS-X99: Operating instructionsStartup guideOperating instructionsStartup guideOperating instructions
                                                                                                                                                                                                                                                                                                                                                                       |
Personal Audio SystemSRS-X99Connection method 3: Connecting to a Wi-Fi network using a PC connected wirelessly (Windows 7/Windows 8)Note that the speaker should be initialized to the factory default for this connection. All BLUETOOTH device registration(pairing) information is deleted.This section describes how to connect a Windows 7 or Windows 8 PC and the speaker wirelessly, then how to connectto a wireless router using the PC.Do the following before starting.Disconnect the LAN cable (not supplied) from the speaker.Place the speaker near the wireless router.Set the Wi-Fi antenna on the rear to the upright position.Locate the SSID (the name of a wireless network) and encryption key (WEP or WPA), which are required to set up aWi-Fi network. The encryption key restricts access to devices on a network. It is used to make more securecommunication between the devices connected to wireless routers and access points.1. Have the Wi-Fi network name (SSID) and password of the wireless router available for reference.For details, refer to the operating instructions of your wireless router.2. With the speaker turned on, tap and hold the VOL (volume) – button and the (on/standby) button at the sametime for more than 5 seconds.The power of the speaker turns off automatically. The settings of the speaker return to their factory defaults, andnetwork settings and all BLUETOOTH device registration (pairing) information are deleted.3. Turn on the speaker.The (on/standby) indicator lights up in green, then the LINK indicator begins to flash. Wait about two minutesuntil the LINK indicator flashes slowly (blinks once in three seconds).4. Connect the speaker to the PC.i. Click or tap the desktop on the Start screen.ii. Select the or icon.iii. Select [SRS-X99] from the network list.Help GuideHow to Use240 |
Related manuals for Sony SRS-X99
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved