Sony SRS-X99 Help Manual
Also see for SRS-X99: Operating instructionsStartup guideOperating instructionsStartup guideOperating instructions
If your smartphone or Walkman is NFC-compatible, touch it on the N-Mark of the speaker. The speaker will turn onautomatically, register (pair) with the device, and a BLUETOOTH connection can be made.7. NETWORK button/indicatorTap to switch the speaker to NETWORK mode.Tap to listen to music stored in a device and from music services on the home network.The connection status of the network is indicated by the flashing or lighting of the indicator.8. (BLUETOOTH) PAIRING button/indicatorTap to switch the speaker to BLUETOOTH mode or pairing mode.Tap to pair or connect with a BLUETOOTH device, or listen to music with a BLUETOOTH device.The connection status of the BLUETOOTH device is indicated by the flashing or lighting of the indicator.Tap once to switch the speaker to BLUETOOTH mode. Tap and hold to switch the speaker to pairing mode.9. USB-A button/indicatorTap to switch the speaker to USB-A mode.Tap to listen to music in a device connected to the USB A port ( A).The USB-A indicator lights up when tapped.10. USB-B button/indicatorTap to switch the speaker to USB-B mode.Tap to listen to music in a device connected to the USB B port ( B).The USB-B indicator lights up when tapped.11. AUDIO IN button/indicatorTap to switch the speaker to AUDIO IN mode.Tap to listen to music in a device connected to the AUDIO IN jack.The AUDIO IN indicator lights up when tapped.12. Wi-Fi antennaSet upright before Wi-Fi connection, as below.Swing the left side of the antenna outward.Pull out the antenna slightly until it can be rotated.Rotate the antenna 90 degrees clockwise.Set the antenna upright.13. AC IN terminalConnect the AC power cord (supplied).14. AUDIO IN jackConnect to the headphone jack of a portable audio device, etc., using a audio cable (not supplied).15. WPS buttonPress and hold when connecting to a Wi-Fi network.After pressing and holding for 2 seconds, beeps will be heard indicating that the speaker is ready to connect to awireless router.If your wireless router has a WPS button, you can use the speaker’s WPS button to connect to the network.16. LAN portUse a commercially-available LAN cable to connect the computer or the wireless router.17. USB B port ( B)Connect a computer using a USB cable (not supplied).185 |
Related manuals for Sony SRS-X99
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved