Sony SRS-X88 Startup Manual

Also see for SRS-X99: Operating instructions Operating instructions Startup guide Help guide Operating instructions

4-566-483-43(1)Personal Audio SystemListening to Music over Your Wi-Fi NetworkSRS-X88Wi-Fi Startup Guide Connecting the unit to your Wi-Fi networkXperiaiPhoneWPSRequired items: Xperia™ or other Android smartphone, wireless routerRequired items: iPhone/iPad/iPod touch, wireless routerRequired item: Wireless router with WPS (AOSS) buttonUse an Android smartphone such as an Xperiain which SongPal (free app) is installed toconfigure Wi-Fi settings of the unit.This method requires a Wi-Fi connection ofthe smartphone and a BLUETOOTHconnection between the smartphone and theunit. The Wi-Fi setting information is sentfrom the smartphone to the unit viaBLUETOOTH.• Some wireless routers have multiple SSIDs.Connect the unit and your Androidsmartphone to the same SSID.Use an iPhone in which SongPal (free app) isinstalled to configure Wi-Fi settings of theunit.This method requires a Wi-Fi connection ofthe iPhone and a BLUETOOTH connectionbetween the iPhone and the unit. The Wi-Fisetting information is sent from the iPhone tothe unit via BLUETOOTH.• Some wireless routers have multiple SSIDs.Connect the unit and your iPhone to the sameSSID.Configure Wi-Fi settings of the unit with apush of each WPS (AOSS) button on thewireless router and the unit.• To check if your wireless router is compatiblewith WPS (Wi-Fi Protected Setup™), refer tothe operating instructions of your router.1Preliminary steps: Connect your smartphone to your Wi-Fi network. Record the SSID and password of your routerthat your smartphone is connecting to in thefollowing spaces.For details, refer to the operating instructions of yourrouter.SSID:Password: Install SongPal on your smartphone.Search for SongPal on GooglePlay™1Preliminary steps: Confirm that your iPhone isconnected to your Wi-Finetwork. Install SongPal on your iPhone.Search for SongPal on theApp Store1Place the unit close to your wirelessrouter.2Tap the / (on/standby) button to turnon the unit.Flashing SlowflashingThe / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins toflash slowly (once per 3 seconds). Slow flashing beginsin about 2 minutes.2Tap the / (on/standby) button to turnon the unit.Flashing SlowflashingThe / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins toflash slowly (once per 3 seconds). Slow flashing beginsin about 2 minutes.2Tap the / (on/standby) button to turnon the unit.Flashing SlowflashingThe / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins toflash slowly (once per 3 seconds). Slow flashing beginsin about 2 minutes.3Press and hold the WPS button of theunit until it beeps (about 2 seconds).The WPS button is on the rear of the unit.4Within 90 seconds, press the WPSbutton*4 of the router.Depending on the wireless router, press and hold theWPS button for a few seconds. For details, refer to theoperating instructions of your router.*4 The WPS button may be called “AOSS button” dependingon the wireless router.4Check that the (BLUETOOTH) indicatoris lit.Flashing LitWhen a BLUETOOTH connection is established, the(BLUETOOTH) indicator stops flashing and stays lit.4Check that the (BLUETOOTH) indicatoris lit.Flashing LitWhen a BLUETOOTH connection is established, the(BLUETOOTH) indicator stops flashing and stays lit.5Check that the LINK indicator lights up inorange.Flashing LitWhen the indicator stays lit, the Wi-Fi connection isestablished. Depending on the environment, it may takemore than 1 minute.5Configure Wi-Fi settings following theSongPal instructions.If password entry is required onthe display, select the SSID andenter the password recorded instep 1 - .The screen on the right isdisplayed.5Configure Wi-Fi settings following the SongPal instructions.6Check that the LINK indicator lights up inorange.Flashing LitWhen the indicator stays lit, the Wi-Fi connection isestablished. Depending on the environment, it may takemore than 1 minute.6Check that the LINK indicator lights upin orange.Flashing LitWhen the indicator stays lit, the Wi-Fi connection isestablished. Depending on the environment, it maytake more than 1 minute.3Make a BLUETOOTH connection between the unit and iPhone.3Make a BLUETOOTH connection betweenthe unit and smartphone.If your smartphone does not support the NFC function,see  to  on the right. Tap and start up [SongPal] on yoursmartphone.Follow the on-screen instructions. Touch the N-Mark on the unit with thesmartphone.Touch and hold untilthe smartphoneresponds.Pairing is completed in about 1 minute. Tap the (BLUETOOTH) PAIRING button of theunit once.The (BLUETOOTH) indicator begins to flashquickly.*3* 3 The first time you tap the (BLUETOOTH) PAIRINGbutton after purchasing this unit, the (BLUETOOTH)indicator flashes quickly. To pair with another device, tapand hold the (BLUETOOTH) PAIRING button until itbeeps. Search for the unit on the iPhone.Tap [Settings]  [Bluetooth].Turn on BLUETOOTH.Tap [SRS-X88].Non-NFC compatible smartphone Tap [SRS-X88] on yoursmartphone.* 2 The first time you tap the (BLUETOOTH) PAIRINGbutton after purchasing this unit, the (BLUETOOTH)indicator flashes quickly. To pair with another device,tap and hold the (BLUETOOTH) PAIRING buttonuntil it beeps. Set the BLUETOOTH function of thesmartphone to on. Tap and start upSongPal, then [Openthe Bluetooth settingscreen]. Tap the (BLUETOOTH) PAIRING buttonof the unit once.The (BLUETOOTH) indicator begins to flashquickly.*2If the Wi-Fi connection failsYou can use a PC browser to configure Wi-Fi settings of the unit. Connect the unit to your PC using acommercially-available network (LAN) cable.For details, refer to the Operating Instructions, “Listening to music via a Wi-Fi network”.This document introduces how to play music after connecting this unit to your Wi-Fi network.A Wi-Fi network enables you to easily enjoy music stored in wireless devices in your home, such as a PC or smartphone/iPhone. For other connection or listening methods, refer to Help Guide (indicated on the right).First Connect the unit to an AC outlet with the ACadaptor and AC power cord, then set the antennain the upright position.Make sure that a LAN cable is not connected. A wiredand wireless connection cannot be used at the sametime.90 degreesChoose your device or software to play music, then go to “ Listeningto music with the unit” overleaf.PC (Media Go) Set music stored in the PC to share by using Media Go, andoperate by using SongPal*1 installed on your smartphone.PC (iTunes)PC (Windows Media Player)Smartphone (SongPal app) Listen to music in your smartphone/iPhone/iPad/iPodtouch by operating SongPal.Xperia (WALKMAN® app)iPhone/iPad/iPod touchChoose a Wi-Fi connection method depending on your device,then go to “ Connecting the unit to your Wi-Fi network” below.Xperia Use an Android smartphone in which SongPal (free app) isinstalled to configure the Wi-Fi settings of the unit.iPhone Use an iPhone/iPad/iPod touch in which SongPal (free app)is installed to configure the Wi-Fi settings of the unit.WPS Use a wireless router with a WPS (AOSS) button to configurethe Wi-Fi settings of the unit with a push of the button.PCConfigure the Wi-Fi settings using a browser of a PC. Refer to theOperating Instructions of the separate document, “Listening to musicvia a Wi-Fi network”.Documents providedWi-Fi Startup Guide (this document)Explains how to listen to music stored in your PC or other device over yourWi-Fi network.Operating Instructions (separate document)Explains important safety information, BLUETOOTH connection method,troubleshooting, etc.Help Guide (web document for a PC/smartphone)Explains details about the unit; network and BLUETOOTH connectionmethod with various devices, High-Resolution Audio playback method,etc.http://rd1.sony.net/help/speaker/srs-x88/h_zz/*1 If you operate Media Go on your PC directly without a smartphone, a connection method other than network (e.g.BLUETOOTH connection) is required. If [Share Wi-Fi settings?] is displayed, tap [Allow].The screen on the right isdisplayed. Tap and start up [SongPal] on youriPhone.Follow the on-screen instructions. When the screen on the rightis displayed, tap [OK].See overleaf to play backSee overleaf to play backSee overleaf to play back Continued: “  Listening to music with the unit” overleaf

/ 2

Related manuals for Sony SRS-X99