Sony IXS-6700-C Installation Manual

Also see for ixs-6600: Operation manual

2-2 IXS-6600/6700Functions of the Operation Buttonsa MENU buttonPress to return to the top display.b CANCEL buttonOn a layer below the top menu, this button lets you moveto the next layer above.Press to retrieve the stored settings, canceling any changesnot yet stored.c ENTER buttonThis button lets you move to the next layer below.Press to store your settings when the settings have beenchanged.When this button is pressed together with the MENUbutton, the setting menu is displayed.d G g buttonsPress to select an option or move to the adjacent digit of thevalue.e F f buttonsPress to change the displayed item on the same layer.Basic OperationsBasic operations using the operation buttons are asfollows:To display the top display in the display windowPress the MENU button. The top display (INTEGRATEDROUTING SYSTEM) appears in the display window.If the backlight is not lit, press the MENU button again,and the backlight will light.To move to the next layer belowPress the ENTER button.To move to the next layer abovePress the CANCEL button.To change the displayed item on the same layerPress the F or f button.To return to the top displayPress the MENU button.Confirming the Status of theMachineYou can confirm the settings of the DIP switches on theinternal board, Station ID of the S-BUS station, etc.Proceed as follows:1 Press the MENU button to display the top display.2 Press the F or f button to display DISP UNITSTATUS in the display window.3 Press the ENTER button.4 Press the F or f button to select an item whosesettings are to be confirmed.CPU RUN: Which CPU (main or backup) is activeCPU SW SETTING: Settings of the DIP switches onthe CA-65 board.IP ADDRESS: IP address of the network connectionof the CPUSBUS STATION ID: Station ID of the S-BUS stationPSU ELAPSED TIME: Elapsed time of each powerunitFAN ELAPSED TIME: Elapsed time of each fan unit5 Press the ENTER button.The item selected in step 4 appears on the second lineof the display window.Press the F or f button to change the displayed item.Resetting the Elapsed TimeYou can reset the elapsed time of the power unit or fan unit.Proceed as follows:1 Press the MENU button to display the top display inthe display window.2 Press the MENU button and ENTER buttonsimultaneously to display the setting menu (SET/RESET STATUS) in the display window.3 Press the ENTER button.MENU ENTERCANCELa MENU buttonb CANCEL buttonc ENTER buttond G g buttonse F f buttons