Sony IXS-6700-C Installation Manual

Also see for ixs-6600: Operation manual

IXS-6600/6700 1 (P)Attention-when the product is installed in Rack:(For IXS-6600/IXS-6700)1. Prevention against overloading of branch circuitWhen this product is installed in a rack and issupplied power from an outlet on the rack, pleasemake sure that the rack does not overload the supplycircuit.2. Providing protective earthWhen this product is installed in a rack and issupplied power from an outlet on the rack, pleaseconfirm that the outlet is provided with a suitableprotective earth connection.3. Internal air ambient temperature of the rackWhen this product is installed in a rack, please makesure that the internal air ambient temperature of therack is within the specified limit of this product.4. Prevention against achieving hazardouscondition due to uneven mechanical loadingWhen this product is installed in a rack, please makesure that the rack does not achieve hazardouscondition due to uneven mechanical loading.5. Install the equipment while taking the operatingtemperature of the equipment into considerationFor the operating temperature of the equipment, referto the specifications of the Operation Manual.6. When performing the installation, keep the rear ofthe unit 10 cm (4 inches) or more away from wallsin order to obtain proper exhaust and radiation ofheat.For safety, do not connect the connector for peripheraldevice wiring that might have excessive voltage to thefollowing port(s).: NETWORK A, B connectorFollow the instructions for the above port(s).For the customers in the NetherlandsVoor de klanten in NederlandHoe u de batterijen moet verwijderen, leest u in deOnderhoudshandleiding.Gooi de batterij niet weg maar lever deze in als kleinchemisch afval (KCA).Für Kunden in DeutschlandEntsorgungshinweis: Bitte werfen Sie nur entladeneBatterien in die Sammelboxen beim Handel oder denKommunen. Entladen sind Batterien in der Regel dann,wenn das Gerät abschaltet und signalisiert “Batterieleer” oder nach längerer Gebrauchsdauer der Batterien“nicht mehr einwandfrei funktioniert”. Umsicherzugehen, kleben Sie die Batteriepole z.B. miteinem Klebestreifen ab oder geben Sie die Batterieneinzeln in einen Plastikbeutel.