Sony IXS-6700-C Installation Manual

Also see for ixs-6600: Operation manual

1-24 IXS-6600/6700The connection example of the S-BUS data link using the IXS-6700 as the primary station is shown.nThe IXS-6700 does not have the control function of the monitoring S-BUS system.Either one of the REMOTE 1 connectors of the secondary station routing switchers can be used.*1 : (S) indicates the secondary station. For the secondary stations, set the station ID in the range of ID = 2 to 254 in the manner that thesame ID must not be duplicated.*2 : Install the 75 Z terminators to the T type bridge of the last device on the S-BUS data link and to the unused REMOTE 1 connector.: S-BUS: Signal system line: Ethernet: T-type bridge (A): T-type bridge (B): 75 Z terminator*2: Layer of matrixTerminalPrimarystationSecondarystationTertiary stationLevel 1Personal computer(Terminal emulator)Personal computer(Terminal emulator)EthernetswitchIntegratedrouting systemIXS-6700(P)SourceVTRREMOTE1 AREMOTE1 B1REMOTE1 B2REMOTE1 CDestinationVTRVideoTime codeAudio channel 1/2Audio channel 3/4Time codeAudioChannel 1/2 AudioChannel 3/4Audiorouting switcher(S)*1Audiorouting switcher(S)*1Time coderouting switcher(S)*1Eachrouting switcher(S)*1Maximum128equipmentRemotecontrol panelRemotecontrol panelRemotecontrol panelSubnet ControllerSubnet ControllerRemotecontrol panelRemotecontrol panelDisplay unitDisplay unitDisplay unitDisplay unitLevel 8Level 4Level 3Level 2VideoTerminalMaximum16 equipmentNETWORK ANETWORK B