1. MENU → (Custom Settings) → [Release w/o Lens] → desired setting.Menu item detailsEnable:Releases the shutter when no lens is attached. Select [Enable] when attaching the product toan astronomical telescope, etc.Disable (default setting):Does not release the shutter when a lens is not attached.NoteCorrect metering cannot be achieved when you use lenses that do not provide a lenscontact, such as the lens of an astronomical telescope. In such cases, adjust the exposuremanually by checking it on the recorded image.How to Use Using shooting functions Setting the other functions of this productS. Auto Img. Extract.Sets whether or not to save all the images that were shot continuously in [Superior Auto].1. MENU → (Custom Settings) → [S. Auto Img. Extract.] → desired setting.Menu item detailsAuto (default setting):Saves one appropriate image selected by the product.Off:Saves all of the images.NoteEven if you set [S. Auto Img. Extract.] to [Off] with [Hand-held Twilight] selected as the scenerecognition mode, one combined image is saved.When the [ Auto Obj. Framing] function is activated, two images are saved even if youset [S. Auto Img. Extract.] to [Auto].How to Use Using shooting functions Setting the other functions of this product
