Shoot the subject at a distance closer than the flash range using the flash.Light the room and shoot the subject.Troubleshooting Troubleshooting Shooting still images/moviesDots appear and remain on the screen.This is not a malfunction. These dots are not recorded.Troubleshooting Troubleshooting Shooting still images/moviesYou cannot shoot images continuously.The memory card is full. Delete unnecessary images.The battery level is low. Insert a charged battery pack.Troubleshooting Troubleshooting Shooting still images/moviesThe image is whitish (Flare)./Blurring of light appears onthe image (Ghosting).The picture was taken under backlit conditions, and excessive light has entered the lens.Attach a lens hood.Troubleshooting Troubleshooting Shooting still images/moviesThe corners of the picture are too dark.If any filter or hood is used, take it off and try shooting again. Depending on the thickness ofthe filter and improper attachment of the hood, the filter or the hood may partially appear inthe image. The optical properties of some lenses may cause the periphery of the image toappear too dark (insufficient light). You may compensate for this phenomenon with [Shading
