7. Switches the next character to a capital or small letter.8. Enters a space.To cancel the input, select [Cancel].Other setting itemsDepending on the status or the setting method of your access point, you may want to set moreitems.WPS PIN:Displays the PIN code you enter into the connected device.Priority Connection:Select [On] or [Off].IP Address Setting:Select [Auto] or [Manual].IP Address:If you are entering the IP address manually, enter the set address.Subnet Mask/Default Gateway:When you set [IP Address Setting] to [Manual], enter the IP address to match your networkenvironment.NoteTo give the registered access point priority, set [Priority Connection] to [On].How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functionsEdit Device NameYou can change the device name under Wi-Fi Direct.1. MENU → (Wireless) → [Edit Device Name].2. Select the input box, then input the device name → [OK].For input method, refer to “How to use the keyboard.”How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functionsDisp MAC Address
