Save important data on the memory card on other media such as a computer, before formatting thememory card.Do not insert anything other than the compliant size of memory card into the memory card slot.Otherwise, a malfunction may result.When inserting or ejecting the memory card, be careful to prevent the memory card from popping outand dropping.[7] How to use Getting Started Inserting a memory cardThe memory cards that can be used with the cameraThe memory cards that can be used with the camera are listed below.SD cardIn this guide, microSD memory cards are referred to as microSD card. The microSD memory card thatcan be used with the camera are as follows.microSD memory cardmicroSDHC memory cardmicroSDXC memory cardMemory Stick mediaIn this guide, Memory Stick media is referred to as Memory Stick Micro (Mark2) media card. TheMemory Stick Micro (Mark2) media that can be used with the camera is as follows.Memory Stick Micro (Mark2) mediaNoteOperation with all memory cards is not assured.Use an SDXC card faster than Class10 when recording movies in XAVC S.Use an SDXC UHS-I memory card (U3) when recording movies with 100 Mbps (FDR-X1000V only).The capacity of the memory card is up to 64GB.[8] How to use Getting Started Using the Tripod AdaptorUsing the tripod adaptor (HDR-AS200V only)By attaching the tripod adaptor to the camera, you can attach accessories to the camera without usingthe waterproof case.1. Fix the screw of the tripod adaptor in the tripod adaptor attachment hole of the camera.2. Match the bottom of the camera and fix firmly with the tripod screw in the direction of the arrow.
