Sony FDR-X1000V Startup Manual

Also see for FDR-X1000V: How to use How to use Reference guide Reference guide Manual

Checking the bundled items• Camera (1)Camera is set in the Waterproof Case. Open the cover of the case as illustratedbelow.• Micro USB cable (1)• Rechargeable battery pack(NP-BX1) (1)• Waterproof Case (1)• Attachment Buckle (1)• Flat Adhesive Mount (1)• Curved Adhesive Mount (1)• Startup Guide (this document) (1)• Reference Guide (1)Name of main parts REC HOLD switch REC (Movie/Photo) button/ENTER (Menu execute) button (N mark) PREV (previous menu) button NEXT (next menu) button Display panel Speaker REC/LIVE lamp IR remote receiver Lens Microphones Connector cover (HDMI OUT,Multi/Micro USB Terminal) REC/access/CHG (charge) lamp Lock lever Battery pack/memory card coverGetting StartedCharging the battery pack1 Slide the lock lever down to open the battery pack cover.2 Insert the battery pack.Align the  mark as illustrated.3 Close the cover.Confirm that the yellow mark on the lock lever is not visible.4 Confirm that the camera is turned off.To turn off the camera, press the NEXT or PREV button severaltimes to display [PwOFF], and press the ENTER button.5 Open the connector cover () and connect the camera toan activated computer with the micro USB cable (supplied)().Lights in amberwhile chargingMicro USB cableConnector coverInserting a memory cardMemory Stick Micro™(Mark2) mediamicroSD card/microSDHC card/microSDXC cardPrintedsideTerminalside• Insert the memory card properly, confirming each side is facing thecorrect direction.• To eject the memory card, lightly push the memory card once.* Use an SDXC card (Class10) when recording movies in XAVC S. Use anSDXC UHS-I memory card (U3) when recording movies with 100 Mbps.Notes• Operation with all memory cards is not assured.• Confirm the direction of the memory card. If you forcibly insert the memory cardin the wrong direction, the memory card, memory card slot, or image data maybe damaged.• Format the memory card before use.• Confirm that the connector cover and the battery pack/memory card cover aresecurely closed and any foreign matter is not stuck in the cover before use.Otherwise, it may result in water immersion.Setting the clockPress the NEXT or PREV button and select [SETUP]  [CONFG] [DATE] to set the date and time, and region.Recording1 Press the NEXT or PREV button to turn the camera on.2 Press the NEXT or PREV button to select the desiredshooting mode.3 Press the REC button to start recording.To stop recording, press the REC button again.* When you press the REC button while the camera is turned off,recording starts with the last shooting mode set before thecamera was turned off.Notes• During periods of extended shooting, camera temperature may rise to a pointwhere shooting stops automatically.• Playback of images recorded with other cameras, is not assured on this camera.• If you play back [XAVC S 120p/100p] or [XAVC S 240p/200p] movies recordedwith this camera on a camera which does not support that format, the cameramay freeze. In this case, remove and reinsert the battery.SettingYou can change the shooting mode and various settings of the camerain [SETUP] mode.1 Press the NEXT or PREV button to display [SETUP] and pressthe ENTER button.2 Press the NEXT or PREV button to display the item to setand press the ENTER button.© 2015 Sony Corporation Printed in Chinahttp://www.sony.net/FDR-X1000V4-566-638-11(1)Digital 4K Video Camera RecorderStartup GuideFor the detailed information on how to use the camera and software,visit the following Web site.http://www.sony.net/actioncam/support/To edit movies, use the PC software dedicated to the camera “ActionCam Movie Creator.” You can download it from the following Web site.http://www.sony.net/acmc/The information on the sticker (in the perforated box, below) is requiredwhen connecting the camera to a smartphone.

/ 2

Related manuals for Sony FDR-X1000V