Sony FDR-X1000V Reference Manual

Also see for FDR-X1000V: How to use How to use Reference guide Manual Startup guide

Note on optional accessoriesGenuine Sony accessories may not be available in some countries/regions.Security in the use of wireless LAN devices• To avoid hacking, access by malicious third parties, and othervulnerabilities, confirm that the wireless LAN is always secure.• It is very important to set up security on a wireless LAN.• If a problem occurs due to inadequate security measures or due toforeseeable circumstances, Sony Corporation is not responsible forany resulting damage.Note on wireless network functionWe assume no responsibility whatsoever for any damage caused byunauthorized access to, or unauthorized use of, destinations loaded onthe camera, resulting from loss or theft.SpecificationsFDR-X1000VSignal format: UHDTVHDTVNTSC color, EIA standardsPAL color, CCIR standardsPower requirements: Rechargeable battery pack, 3.6 V (NP-BX1)USB, 5.0 VRechargeable battery pack NP-BX1:Maximum charge voltage: DC 4.2 VMaximum charge current: 1.89 ASplash-proof: IPX4 (based on our tests)Operating temperature: -10 °C to +40 °C (14 °F to 104 °F)Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F)Dimensions (Approx.):24.4 mm × 51.7 mm × 88.9 mm (31/32 in. × 2 1/8in. × 3 1/2 in.) (W/H/D, including protrusions andexcluding the supplied waterproof case)Mass: Approx. 89 g (3.1 oz) (main body only)Total weight in use: Approx. 114 g (4.0 oz) (including the battery pack,excluding the supplied waterproof case)HDR-AS200VSignal format: HDTVNTSC color, EIA standardsPAL color, CCIR standardsPower requirements: Rechargeable battery pack, 3.6 V (NP-BX1)USB, 5.0 VRechargeable battery pack NP-BX1:Maximum charge voltage: DC 4.2 VMaximum charge current: 1.89 ASplash-proof: IPX4 (based on our tests)Operating temperature: -10 °C to +40 °C (14 °F to 104 °F)Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F)Dimensions (Approx.):24.2 mm × 46.5 mm × 81.5 mm (31/32 in. × 1 7/8 in.× 3 1/4 in.) (W/H/D, including protrusions andexcluding the supplied waterproof case)Mass: Approx. 68 g (2.4 oz) (main body only)Total weight in use: Approx. 93 g (3.3 oz) (including the battery pack,excluding the supplied waterproof case)• Design and specifications are subject to change without notice forfuture upgrades.On trademarks• XAVC S and are registered trademarks of Sony Corporation.• Memory Stick and are trademarks or registered trademarks of SonyCorporation.• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMILogo are trademarks or registered trademarks of HDMI Licensing LLC in theUnited States and other countries.• Mac is a registered trademark of Apple Inc. in the United States and othercountries.• iOS is a registered trademark or trademark of Cisco Systems, Inc.• Android and Google Play are trademarks of Google Inc.• iPhone is a trademark or a registered trademark of Apple Inc.• Wi-Fi, the Wi-Fi logo, Wi-Fi PROTECTED SET-UP are registered trademarks of theWi-Fi Alliance.• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in theUnited States and in other countries.• Adobe, the Adobe logo, and Adobe Acrobat are either registered trademarks ortrademarks of Adobe Systems Incorporated in the United States and/or othercountries.• microSDXC logo is a trademark of SD-3C, LLC.In addition, system and product names used in this manual are, ingeneral, trademarks or registered trademarks of their respectivedevelopers or manufacturers. However, the ™ or  marks may not bedescribed in this manual.WARNINGTo reduce the risk of fire or electric shock,1) do not expose the unit to rain or moisture.2) do not place objects filled with liquids, such as vases, on theapparatus.CAUTIONBattery packIf the battery pack is mishandled, the battery pack can burst, cause afire or even chemical burns. Observe the following cautions.• Do not disassemble.• Do not crush and do not expose the battery pack to any shock or force such ashammering, dropping or stepping on it.• Do not short circuit and do not allow metal objects to come into contact withthe battery terminals.• Do not expose to high temperature above 60°C (140°F) such as in direct sunlightor in a car parked in the sun.• Do not incinerate or dispose of in fire.• Do not handle damaged or leaking lithium ion batteries.• Be sure to charge the battery pack using a genuine Sony battery charger or adevice that can charge the battery pack.• Keep the battery pack out of the reach of small children.• Keep the battery pack dry.• Replace only with the same or equivalent type recommended by Sony.• Dispose of used battery packs promptly as described in the instructions.For customers in the U.S.A. and CANADARECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.You can help preserve our environment by returning yourused rechargeable batteries to the collection andrecycling location nearest you.For more information regarding recycling of rechargeablebatteries, call toll free1-800-822- 8837, or visit http://www.call2recycle.org/Caution: Do not handle damaged or leaking Lithium-Ionbatteries.Battery packThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.CAN ICES-3 B/NMB-3 BThis equipment complies with FCC/IC radiation exposure limits set forthfor an uncontrolled environment and meets the FCC radio frequency(RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF)Exposure rules.This equipment has very low levels of RF energy that are deemed tocomply without testing of specific absorption ratio (SAR).For Customers in the U.S.A.If you have any questions about this product, you may call:Sony Customer Information Center1-800-222-SONY (7669)The number below is for the FCC related matters only.Regulatory InformationDeclaration of ConformityTrade Name: SONYModel No.: FDR-X1000V, HDR-AS200VResponsible Party: Sony Electronics Inc.Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.Telephone No.: 858-942-2230This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.This equipment must not be co-located or operated in conjunction withany other antenna or transmitter.CAUTIONYou are cautioned that any changes or modifications not expresslyapproved in this manual could void your authority to operate thisequipment.NoteThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.The supplied interface cable must be used with the equipment in orderto comply with the limits for a digital device pursuant to Subpart B ofPart 15 of FCC Rules.For Customers in CanadaThis device complies with Industry Canada’s licence-exempt RSSs.Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference thatmay cause undesired operation of the device.For Customers in EuropeNotice for the customers in the countries applying EUDirectivesManufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075JapanFor EU product compliance: Sony Deutschland GmbH, HedelfingerStrasse 61, 70327 Stuttgart, GermanyHereby, Sony Corporation, declares that this equipment is in compliancewith the essential requirements and other relevant provisions ofDirective 1999/5/EC. For details, please access the following URL:http://www.compliance.sony.de/NoticeIf static electricity or electromagnetism causes data transfer todiscontinue midway (fail), restart the application or disconnect andconnect the communication cable (USB, etc.) again.This product has been tested and found compliant with the limits setout in the EMC regulation for using connection cables shorter than 3meters (9.8 feet).The electromagnetic fields at the specific frequencies may influencethe picture and sound of this unit.Disposal of waste batteries and electrical and electronicequipment(applicable in the European Union and otherEuropean countries with separate collection systems)This symbol on the product, the battery or on thepackaging indicates that the product and the battery shallnot be treated as household waste. On certain batteriesthis symbol might be used in combination with a chemicalsymbol.The chemical symbols for mercury (Hg) or lead (Pb) are added if thebattery contains more than 0.0005% mercury or 0.004% lead. Byensuring these products and batteries are disposed of correctly, youwill help prevent potentially negative consequences for theenvironment and human health which could otherwise be caused byinappropriate waste handling. The recycling of the materials will help toconserve natural resources.In case of products that for safety, performance or data integrityreasons require a permanent connection with an incorporated battery,this battery should be replaced by qualified service staff only. To ensurethat the battery and the electrical and electronic equipment will betreated properly, hand over these products at end-of-life to theapplicable collection point for the recycling of electrical and electronicequipment. For all other batteries, please view the section on how toremove the battery from the product safely. Hand the battery over tothe applicable collection point for the recycling of waste batteries. Formore detailed information about recycling of this product or battery,please contact your local Civic Office, your household waste disposalservice or the shop where you purchased the product or battery.For Customers in SingaporeFor Customers in U.A.E.FrançaisAide-mémoireLes numéros de modèle et de série se situent sous l’appareil. Prendreen note le numéro de série dans l’espace prévu ci-dessous. Se reporterà ces numéros lors des communications avec le détaillant Sony au sujetde ce produit.Modèle no : FDR-X1000V/HDR-AS200VNo de sérieRemarque sur l’utilisationFonction Wi-Fi• Utilisez le caméscope en respectant les règlements en vigueur àl’endroit où vous vous trouvez.• Vous ne pouvez pas utiliser la fonction Wi-Fi du caméscope sous l’eau.À propos des températures d’utilisationLe caméscope est conçu pour être utilisé à des températures comprisesentre -10 °C et 40 °C (14 °F et 104 °F). Il n’est pas conseillé de prendredes vues dans des endroits extrêmement froids ou chauds dont latempérature n’est pas comprise dans cette plage.Remarques sur l’enregistrement prolongé• Le boîtier du caméscope et la batterie peuvent chauffer en coursd’utilisation. Cela est normal.• Évitez d’utiliser le caméscope pendant une période prolongée lorsque vous letenez en main ou lorsqu’il est au contact direct de la peau. Il est conseillé d’utiliserles supports adhésifs ou le boîtier étanche, voire des supports en option.• La température du caméscope augmente rapidement lorsque latempérature ambiante est élevée.• Laissez le caméscope de côté pendant 10 minutes ou davantage pourpermettre à sa température intérieure de redescendre jusqu’à un niveau sûr.• La qualité d’image risque de se détériorer lorsque la température ducaméscope augmente. Il est conseillé de patienter jusqu’à ce que latempérature du caméscope ait diminué, avant de poursuivre la prise de vue.À propos de la protection contre la surchauffeSelon la température du caméscope et de la batterie, il est possible quevous ne puissiez enregistrer aucun film ou que l’alimentation se coupeautomatiquement afin de protéger l’appareil. [CHAUD] s’affiche surl’écran du caméscope et un message apparaît sur l’écran d’un afficheurinstantané à distance vendu séparément avant la mise hors tension ouavant que vous ne puissiez plus enregistrer de film. Dans ce cas, laissezrefroidir la batterie et le caméscope, et ne le remettez pas sous tension.Si la batterie et le caméscope ne sont pas suffisamment refroidislorsque vous le mettez sous tension, l’alimentation risque de se couperà nouveau ou vous risquez de ne pouvoir enregistrer aucun film.À propos de l’étanchéité à la poussière et à l’eauLe caméscope est étanche à la poussière et à l’eau (FDR-X1000V :jusqu’à une profondeur de 10 m (33 pieds) pendant 60 minutesininterrompues/HDR-AS200V : jusqu’à une profondeur de 5 m(16 pieds) pendant 30 minutes ininterrompues). Pour les remarquesrelatives à l’utilisation du boîtier étanche, reportez-vous au Guided’aide en ligne.Remarque sur les accessoires en optionIl est possible que des accessoires Sony authentiques ne soient pasdisponibles dans certains pays/régions.Sécurité d’utilisation des périphériques LAN sans fil• Pour éviter les risques de piratage, d’accès par des tiers malveillants oud’autres vulnérabilités, assurez-vous que le LAN sans fil est toujours sécurisé.• Il est très important de configurer la sécurité d’un LAN sans fil.• Si vous rencontrez problème consécutif à des mesures de sécuritéinappropriées ou à des circonstances prévisibles, Sony Corporationn’assume aucune responsabilité en cas de dommages éventuels.Remarque sur la fonction réseau sans filNous n’assumons aucune responsabilité pour tout dommage provoquépar un accès non autorisé ou une utilisation non autorisée desdestinations chargées sur le caméscope qui pourrait provoquer uneperte ou un vol.SpécificationsFDR-X1000VFormat de signal : UHDTVHDTVSystème couleur NTSC, normes EIASystème couleur PAL, normes CCIRAlimentation requise : Batterie rechargeable, 3,6 V (NP-BX1)USB, 5,0 VBatterie rechargeable NP-BX1 :Tension de charge maximale : 4,2 V CCCourant de charge maximal : 1,89 ARésistance aux éclaboussures :IPX4 (sur base de nos tests)Température de fonctionnement :-10 °C à +40 °C (14 °F à 104 °F)Température de stockage :-20 °C à +60 °C (-4 °F à +140 °F)Dimensions (environ) : 24,4 mm × 51,7 mm × 88,9 mm (31/32 po ×2 1/8 po × 3 1/2 po) (L/H/P, y compris les partiessaillantes, mais non compris le boîtier étanchefourni)Poids : Environ 89 g (3,1 on) (corps principal uniquement)Poids total en cours d’utilisation :Environ 114 g (4,0 on) (batterie comprise, boîtierétanche fourni non compris)EnglishOwner’s RecordThe model and serial numbers are located on the bottom. Record theserial number in the space provided below. Refer to these numberswhenever you call your Sony dealer regarding this product.Model No. FDR-X1000V/HDR-AS200VSerial No. Suite au versoNote on usingWi-Fi function• Use the camera in accordance with the regulations of the area of use.• You cannot use the Wi-Fi function of the camera underwater.On operating temperaturesThe camera is designed for use in temperatures between -10 °C and40 °C (14 °F and 104 °F). Shooting in extremely cold or hot places thatexceed this range is not recommended.Notes on long-time recording• Camera body and battery may get warm with use – this is normal.• Avoid using the camera for a long time when holding the camera inyour hand or when it is directly touching your skin. It is recommendedthat you use the supplied adhesive mounts or waterproof case, oroptional mount accessories.• Under high ambient temperatures, the temperature of the camerarises quickly.• Leave the camera alone for 10 minutes or longer to allow thetemperature inside the camera to decrease to a safe level.• When the temperature of the camera rises, the image quality maydeteriorate. It is recommended that you wait until the temperature ofthe camera drops before continuing to shoot images.On the overheat protectionDepending on the camera and battery temperature, you may be unableto record movies or the power may turn off automatically to protect thecamera. [HEAT] will be displayed on the display panel of the cameraand a message will be displayed on the screen of a separately soldLive-View Remote before the power turns off or you can no longerrecord movies. In this case, leave the power off and wait until thecamera and battery temperature goes down. If you turn on the powerwithout letting the camera and battery cool enough, the power mayturn off again or you may be unable to record movies.About dust-proof and waterproof performanceThe camera is dust-proof and waterproof (FDR-X1000V: Up to a depthof 10 m (33 feet) of water for 60 minutes continuously/ HDR-AS200V:Up to a depth of 5 m (16 feet) of water for 30 minutes continuously). Forthe notes on use of the waterproof case, refer to the online Help Guide.FDR-X1000V/HDR-AS200V4-566-639-11(2)Digital 4K Video Camera RecorderDigital HD Video Camera RecorderCaméscope numérique 4KCaméscope numérique HDVideocámara Digital 4KVideocámara Digital HDReference GuideGuide de référenceGuía de referencia© 2015 Sony Corporation Printed in Chinahttp://www.sony.net/

/ 2

Related manuals for Sony FDR-X1000V