Sony DSR-370K1 Operating Instructions Manual

Contents

Chapter 4 Viewfinder Screen Indications and Menus 109Chapter 4 Viewfinder Screen Indications and MenusTo call up files recorded onto a tapeLoad the cassette that contains the recorded files.1 Set the SETUP switch to FILE.2 Access advanced menu page 10 (page 9 on theDSR-370/370P).(The following figure shows an example for theDSR-570WS/570WSP.)3 Move the cursor to SELECT FILE with the MENUswitch and move the MENU dial to select TAPE.4 Move the cursor to CHG FILE and press theMENU dial.The screen appears as shown below.5 Press the MENU dial to call up the file. To abortthe call up operation, move the MENU dial (thedisplay returns to the one shown in step 3).During the call up operation, the following displayappears.a) The model name DSR-570WS/570WSP or DSR-370/370P is displayed when a tape saved by one of thosemodels is read. Nothing is displayed when a tapesaved by previous models (DSR-500WS/500WSP,etc.) is read.When the call up operation ends, the displaychanges as shown below.The settings of the camcorder are now replaced bythe settings in the called file.NoteFiles saved to tape by the DSR-370/370P cannotbe recalled by other models.Name of filerecorded ontotape